TVT Design Dual Exhaust on a SRT6
Guest
Posts: n/a
Our Exhaust is finished and ready for production. We built two models one with a single dual in/dual out muffler and the other with two seperate mufflers.
www.tvtdesign.com/videos
This shows the clip of the single muffler set up.
The system is built entirely of T304 SS and welds right before the rear cats. It incorporates 2 Resonators, 2 Race mufflers, H-pipe, and oval tips. All clamps (v-band) and hangars are T304 as well.
Enjoy!
www.tvtdesign.com/videos
This shows the clip of the single muffler set up.
The system is built entirely of T304 SS and welds right before the rear cats. It incorporates 2 Resonators, 2 Race mufflers, H-pipe, and oval tips. All clamps (v-band) and hangars are T304 as well.
Enjoy!
Sweet!
Price?
Dyno gains?
What is smallest point of the inner diamater of the tips?
Price?
Dyno gains?
What is smallest point of the inner diamater of the tips?
Originally Posted by TVT_DESIGN
Our Exhaust is finished and ready for production. We built two models one with a single dual in/dual out muffler and the other with two seperate mufflers.
www.tvtdesign.com/videos
This shows the clip of the single muffler set up.
The system is built entirely of T304 SS and welds right before the rear cats. It incorporates 2 Resonators, 2 Race mufflers, H-pipe, and oval tips. All clamps (v-band) and hangars are T304 as well.
Enjoy!
www.tvtdesign.com/videos
This shows the clip of the single muffler set up.
The system is built entirely of T304 SS and welds right before the rear cats. It incorporates 2 Resonators, 2 Race mufflers, H-pipe, and oval tips. All clamps (v-band) and hangars are T304 as well.
Enjoy!
Originally Posted by RPM
Lots of questions I see.
Here is another one - What is up with the cackling/backfire-esque sound made when the throttle is released?
Here is another one - What is up with the cackling/backfire-esque sound made when the throttle is released?
Originally Posted by RPM
Lots of questions I see.
Here is another one - What is up with the cackling/backfire-esque sound made when the throttle is released?
Here is another one - What is up with the cackling/backfire-esque sound made when the throttle is released?
Last edited by robby363; Jun 17, 2009 at 12:55 PM.
Guest
Posts: n/a
Originally Posted by 240M3SRT
Sweet!
Price? 999.00 Shipped
Dyno gains? Very little to gain on the dyno. Figure the same gains as any of the dual 2.5" systems.
What is smallest point of the inner diamater of the tips? Tips are 2.5" inlet, 3.5" outlet.
Price? 999.00 Shipped
Dyno gains? Very little to gain on the dyno. Figure the same gains as any of the dual 2.5" systems.
What is smallest point of the inner diamater of the tips? Tips are 2.5" inlet, 3.5" outlet.
Customer wanted all 4 original cats on the car, so they stayed.
This system is designed to replace the rear cats and be welded from that point on. We saw no reason to replace from the manifolds back as the stock pipe up to that point is already 2.5" and free flowing. This alone saved a lot of money.
The 999.00 includes V-bands to weld to the stock exhaust and the new exhaust to allow for easy disconnect. If you don't want or need the V-bands the system is 889.00 shipped (v-bands=$$$)
Originally Posted by robby363
The stock exhaust makes that crackiing/backfire sound to when you rev it hard when it's in park.
Guest
Posts: n/a
Originally Posted by j-fire
dyno Please.
If we get more then 15 RWHP I'd be impressed. I like it for the sound and weight savings over the stock set up. If you are looking for a power gain there are better places to spend 1k.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



