Let's See Those Customized SRT6's!!
Originally Posted by Juggernaut
Are those Mercedes center caps

The gear is from Vertical Doors in Corona, CA. They own the patent for the out and up design. I have had them on for a year with no problems and drive about 4-5 days a week. The struts are fine and should last around 3 years or more. As I mentioned in other posts, I have some problems with my ankles and legs and find it hard to get in or out with the standard hinges if someone is parked too close. With the vertical doors I just swing my feet out and find it much easier.
Originally Posted by Xray
SRT6 I luv the doors what kit did you use and how are they holding up. How often do you drive the car I use mine almost daily and am concerned about the lift mechanism.
I know I wasnt going to mod the SSB....but this isnt really a mod...just different factory...(sort of)
..... okay, I had the parts so what the heck..


..... okay, I had the parts so what the heck..

Originally Posted by BLKFIN
a little different taste (im a little younger then most of you) but none the less, my ride 
sorry some of the pics are bad quality. camera phones for the lose.
myride.jpg
wheels1.jpg
wheels2.jpg
wheels3.jpg
sorry some of the pics are bad quality. camera phones for the lose.
myride.jpg
wheels1.jpg
wheels2.jpg
wheels3.jpg
I dont mind your car at all special k, the only thing I'd do is get wheel spacers and lower it will look really tough. good job!
I had that kicker sticker on mine to but my fiance' made me take it off lol
I had that kicker sticker on mine to but my fiance' made me take it off lol
Originally Posted by kolevski
I dont mind your car at all special k, the only thing I'd do is get wheel spacers and lower it will look really tough. good job!
I had that kicker sticker on mine to but my fiance' made me take it off lol
I had that kicker sticker on mine to but my fiance' made me take it off lol
i have 31mm spacers in the back and 15mm spacers in the front. i know the backs still need like another 15mm.
im saving up for coilovers, but being in the status of unemployed right now, i dont see that going very quickly.
Originally Posted by andrew
~ blkfin... i love your car - the wheels make it come to life... oh sooo sweet. 
Originally Posted by special_kxoxo
i have 31mm spacers in the back and 15mm spacers in the front. i know the backs still need like another 15mm.
im saving up for coilovers, but being in the status of unemployed right now, i dont see that going very quickly.
im saving up for coilovers, but being in the status of unemployed right now, i dont see that going very quickly.
Originally Posted by special_kxoxo
im saving up for coilovers, but being in the status of unemployed right now, i dont see that going very quickly.
Well I havent been on here in months!! Sorry. I have been working on my car a ton though. I few new traction items
I wont post a pic of those, because I am going to try to sell a few..
60k miles, NX wet kit 100-150 is what I shoot, twin bottles Y-d together, lowered, my cold air, my intake manifolds, my intercooler mod, LET heat exchanger, LET Tune, aluminum exhaust, no rear cats, ported blower, custom fabbed blower hat, Code 3 Pulley, 8k HID's, tinted tail lights, 12% window tint all around, ported throttle body,
Thats all I can think of now
Well I have tried to post pics two times, with no luck, says error.. not sure
Just read the sticky on the pics not working! LOL
I will try to post some over the weekend
60k miles, NX wet kit 100-150 is what I shoot, twin bottles Y-d together, lowered, my cold air, my intake manifolds, my intercooler mod, LET heat exchanger, LET Tune, aluminum exhaust, no rear cats, ported blower, custom fabbed blower hat, Code 3 Pulley, 8k HID's, tinted tail lights, 12% window tint all around, ported throttle body,
Thats all I can think of now
Well I have tried to post pics two times, with no luck, says error.. not sure
Just read the sticky on the pics not working! LOL
I will try to post some over the weekend
Last edited by BDJ's Racing; Dec 23, 2009 at 01:26 PM.
Originally Posted by BDJ's Racing
Well I havent been on here in months!! Sorry. I have been working on my car a ton though. I few new traction items
I wont post a pic of those, because I am going to try to sell a few..
60k miles, NX wet kit 100-150 is what I shoot, twin bottles Y-d together, lowered, my cold air, my intake manifolds, my intercooler mod, LET heat exchanger, LET Tune, aluminum exhaust, no rear cats, ported blower, custom fabbed blower hat, Code 3 Pulley, 8k HID's, tinted tail lights, 12% window tint all around, ported throttle body,
Thats all I can think of now
Well I have tried to post pics two times, with no luck, says error.. not sure
Just read the sticky on the pics not working! LOL
I will try to post some over the weekend
60k miles, NX wet kit 100-150 is what I shoot, twin bottles Y-d together, lowered, my cold air, my intake manifolds, my intercooler mod, LET heat exchanger, LET Tune, aluminum exhaust, no rear cats, ported blower, custom fabbed blower hat, Code 3 Pulley, 8k HID's, tinted tail lights, 12% window tint all around, ported throttle body,
Thats all I can think of now
Well I have tried to post pics two times, with no luck, says error.. not sure
Just read the sticky on the pics not working! LOL
I will try to post some over the weekend
Thread
Thread Starter
Forum
Replies
Last Post
RED DOG
Parts/Accessories for sale - Archive
44
Oct 27, 2020 09:00 PM
livefreeordie
WTB - Items/Parts Wanted to Buy - Archive
0
Sep 22, 2015 08:13 PM
Power Sedan
Parts/Accessories for sale - Archive
6
Sep 20, 2015 09:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




