why run 6+ ft of intercooler piping, when you could just place the air to water under hood, near the lower subframe (ive test fit, it works) and eliminate excess weight, and see quicker spool as well.

 

I will be doing that when I get my intake manfolds redone. This was just a quick & simple swap for now.

 

ah, i understand.

well, if you ever ditch your current manifolds, i could definitely use them

 

I am going to try and modify them....but for the right price I will sell them including the TB Y-pipe too. Shot me an offer if you want

 

Just found out my Eibach/Koni setup causes my front end to be out of alignment (-2.7camber) Trying new bolts, but dealer says that won't be enough.....probably going the coilover route and sell the Eibachs and Konis on Ebay

 

all i did today was put all of my new emblems on....and am currently sitting in the car trying to figure out how to get the center console out....im making it waaaaay to hard

 

TVT makes rear but may be out ,KMAC makes kits for front and rear.

 

Have you downloaded and looked at the service manual?

 

no i havent, ive had the veterans tell me where everything is at, it will be pretty easy once i can get to the two screws in the front part of the console, but this is difficult for me where i cant see them cuz the shifter bezel wont pry up far enough....

 

I would highly recommend downloading it anyway. You will find step by step instructions with pictures. The shifter bezel has 4 tabs 2 in the bottom, and 2 in the top portion. Use a trim pry tool and it should come up very easy. You can download the service manual from here: https://www.crossfireforum.org/forum...ollection.html. Good luck, it is not very hard to do.

 

I waited 3 months but finally received my clear side markers. I put them in today with the chrome bulbs and love the way they look! Incredibly easy install as well.

 

if youre out of alignment, i can just imagine how bad mine is. probably -5 front and -7 to -9 rear
lol

 

have you tried the eccentric bolts by m/b?

 

Installed my Alpine head unit that I purchased from ImportLabSRT. It looks and sounds great. I think that I will eventually paint the bezel to match the console, but it blends in pretty well as it is. It is nice to have my iPod hooked up in the Crossfire now. Thanks Bryan for the easy transaction.

IMG_38574.jpg

IMG_38563.jpg

 

bought konis shocks b&g lowering springs and tvt camber bars and bolts. picked up the dashdaq setup from 240m3srt and a amg muffler to mod . new windshield washer resovoir. just need some free time to install!!!

 

Threw on my sl55 intake! i can actually FEEL the difference... Lovin it.

 

No problem sir! Im glad you like it.

 

WOW- that looks incredible!

 

Ok, I am not sure whether I was just totally bored or if I have deeper issues to be concerned with, but I detailed my engine bay drip pan today. LOL

IMG_38581.jpg

IMG_38678.jpg

 

I'm not sure either ......but your pan looks good

Have you taken off your wheels and cleaned and waxed the inside of them ?? I do that each month