Crossfire SRT6 A place to discuss SRT-6 specific topics.

Floor mats

Thread Tools
 
Old Jun 10, 2010 | 09:35 AM
  #1 (permalink)  
SRTFAN's Avatar
Thread Starter
Joined: May 2010
Posts: 17
Likes: 0
From: Dallas, TX
Thumbs down Floor mats

Are the floor mats different for the SRT-6 ? I found some with a Chrysler emblem but the picture doesn't look the same as my current floor mats.
 
Reply
Old Jun 10, 2010 | 10:54 AM
  #2 (permalink)  
kingkub57's Avatar
Forum Regular
Joined: Jun 2006
Posts: 453
Likes: 1
From: St. Clair Shores Michigan
Default Re: Floor mats

No the mats are the same for the N/A and the SRT 6, they came with no logos on them, though there are some out there with the Chrysler wings and then there are the CICCI custom made ones through the CICCI forum I think ? and may be others out there.
 
Reply
Old Jun 10, 2010 | 10:58 AM
  #3 (permalink)  
BLKFIN's Avatar
ADDICTED TO BOOST
Joined: May 2005
Posts: 1,625
Likes: 1
From: McKinney, TX
Default Re: Floor mats

Interesting enough, I have purchase two Crossfires one new base in 2005 and a used SRT6 and the both had the Chrysler Wing mats in them. I have seen the plain mats in other Crossfires and must say the Chrysler wing mats are MUCH nicer.
 
Reply
Old Jun 10, 2010 | 11:02 AM
  #4 (permalink)  
acrispy1's Avatar
Senior Member
Joined: Apr 2006
Posts: 4,907
Likes: 1
From: Long Island NY
Default Re: Floor mats

Originally Posted by kingkub57
No the mats are the same for the N/A and the SRT 6, they came with no logos on them, though there are some out there with the Chrysler wings and then there are the CICCI custom made ones through the CICCI forum I think ? and may be others out there.
You can get SRT logo as well as Chrysler logo with or without wings and CICCI logos with coupe or roadster that are OEM fit with snaps all licensed by Chrysler.
 
Reply
Old Jun 10, 2010 | 11:08 AM
  #5 (permalink)  
BLKFIN's Avatar
ADDICTED TO BOOST
Joined: May 2005
Posts: 1,625
Likes: 1
From: McKinney, TX
Default Re: Floor mats

Originally Posted by acrispy1
You can get SRT logo as well as Chrysler logo with or without wings and CICCI logos with coupe or roadster that are OEM fit with snaps all licensed by Chrysler.
Not real sure why but the CICCI mats (I have seen a few of the ones with SRT6 on them) do not seem to be of the same quality as the stock MOPAR part with the wings. I know that the CICCI mats are made by "Loyds" and they make a nice product. I have the SRT4 mats from Loyds in my Caliber and they are much nicer than what they are making for the Crossfire. I wonder why?? My mats in my Caliber are nicer than my Crossfire!
 
Reply
Old Jun 10, 2010 | 11:09 AM
  #6 (permalink)  
SRTFAN's Avatar
Thread Starter
Joined: May 2010
Posts: 17
Likes: 0
From: Dallas, TX
Default Re: Floor mats

Thanks gentlemen, I knew you would come through for me. I really appreciate the info
 
Reply
Old Jun 10, 2010 | 01:37 PM
  #7 (permalink)  
SparkieSRT6's Avatar
SSB SRT6 405hp/401Tq
Joined: Mar 2010
Posts: 4,097
Likes: 2
From: Hooterville
Default Re: Floor mats

I've seen the new SRT6 matts available from CICCI and thought they looked great. The trunk matt with SRT6 logo looks great as well.
 
Reply
Old Jun 10, 2010 | 07:47 PM
  #8 (permalink)  
bluecoupe's Avatar
Senior Member
Joined: Oct 2008
Posts: 3,140
Likes: 83
From: Grimsby, Ontario
Default Re: Floor mats

Originally Posted by SparkieSRT6
I've seen the new SRT6 matts available from CICCI and thought they looked great. The trunk matt with SRT6 logo looks great as well.
Thanks!
 
Reply
Old Jun 10, 2010 | 08:58 PM
  #9 (permalink)  
patpur's Avatar
Senior Member/Moderator
Joined: Sep 2005
Posts: 2,698
Likes: 1
From: Brookeville, Maryland
Default Re: Floor mats

I still have my original mats in my car. I believe they were all berber style carpet which is a bit different from the aftermarket mats I've seen. I think the berber was a choice with the Lloyds mats but as I recall they were more expensive. Lloyds will do the logo's any way you like them, Chrysler/Crossfire/SRT-6 etc. There is an added charge for each logo.
 
Reply
Old Jun 22, 2010 | 12:14 PM
  #10 (permalink)  
1sexyXfire's Avatar
Joined: May 2008
Posts: 103
Likes: 0
From: San Francisco (Bay Area)
Default Re: Floor mats

I'm looking for a set of new mats but not too keen on paying the stealership $120.00 for two mats! If anyone has a lead on some less expensive ones, please advise.
Thanks!
 

Last edited by 1sexyXfire; Jun 22, 2010 at 12:32 PM.
Reply
Old Jun 22, 2010 | 02:05 PM
  #11 (permalink)  
kingkub57's Avatar
Forum Regular
Joined: Jun 2006
Posts: 453
Likes: 1
From: St. Clair Shores Michigan
Default Re: Floor mats

Well I have had two xfires and yes they came with the stock ones no logo's I guess the stock Benz type I would have to say, one was the first year 04 coupe and the other a 05 srt 6, in all the stock cars from the factory, I always seen them come with these stlye mats for at least the first couple of years, and I worked next door to the Chrysler dealer, so I was always checking them out when they first came out. There are a lot of sets out there you will just have to keep looking, I've seen all the stlyes availble, but not all the time. Good luck.
 
Reply
Old Jun 22, 2010 | 08:01 PM
  #12 (permalink)  
InfernoRedXfire's Avatar
Senior Member
Joined: Jul 2007
Posts: 7,951
Likes: 9
From: Dallas, the Republic of Texas
Default Re: Floor mats

Here's a shot of my SRT-6 floor mats available at the CICCI store. For some odd reason, Chrysler would not extend their agreement with Lloyds for the SRT-6 logo. So, CICCI sought out another manufacturer. While they may not be quit as plush as Lloyds, they are much thicker than the OEM stock.




Here are pre-production mats with the wrong grommet:




Edit: They are also available in 2005 logo.


 

Last edited by InfernoRedXfire; Jun 22, 2010 at 08:10 PM.
Reply
Old Jun 22, 2010 | 08:07 PM
  #13 (permalink)  
BLKFIN's Avatar
ADDICTED TO BOOST
Joined: May 2005
Posts: 1,625
Likes: 1
From: McKinney, TX
Default Re: Floor mats

Originally Posted by InfernoRedXfire
Here's a shot of my SRT-6 floor mats available at the CICCI store. For some odd reason, Chrysler would not extend their agreement with Lloyds for the SRT-6 logo. So, CICCI sought out another manufacturer. While they may not be quit as plush as Lloyds, they are much thicker than the OEM stock.
That makes since now. I wonder why Chrysler would not give them the logo as they did for the SRT4 & SRT8?
 
Reply
Old Jun 22, 2010 | 08:35 PM
  #14 (permalink)  
InfernoRedXfire's Avatar
Senior Member
Joined: Jul 2007
Posts: 7,951
Likes: 9
From: Dallas, the Republic of Texas
Default Re: Floor mats

Originally Posted by BLKFIN
That makes since now. I wonder why Chrysler would not give them the logo as they did for the SRT4 & SRT8?
Don't know. I can only speculate that Chrysler & Lloyds were in disagreement on another matter because they gave permission to another manufacturer.
 
Reply
Old Jun 25, 2010 | 08:35 AM
  #15 (permalink)  
ModlessG's Avatar
Joined: May 2010
Posts: 169
Likes: 0
Default Re: Floor mats

I bought the LLoyds mats on Amazon. No logo but they fit real good and look nice
 
Reply
Old Sep 2, 2010 | 10:26 PM
  #16 (permalink)  
1sexyXfire's Avatar
Joined: May 2008
Posts: 103
Likes: 0
From: San Francisco (Bay Area)
Default Re: Floor mats

Thanks for the advice gang! I'm still checking around
 
Reply
Old Sep 3, 2010 | 09:26 AM
  #17 (permalink)  
GenoTex's Avatar
Joined: Dec 2003
Posts: 220
Likes: 0
From: Wizzzzzzzzzconsin
Default Re: Floor mats

speakin' of mats...

anyone else have the problem of (and a solution to) the driver's side mat 'peeling back' and curling up at the 'left foot' extension ?? The 'tongue' that sticks up ... thanks.
 
Reply
Old Sep 4, 2010 | 12:27 PM
  #18 (permalink)  
dinasrt's Avatar
Senior Member
Joined: Apr 2010
Posts: 2,404
Likes: 8
From: Mendocino, CA
Default Re: Floor mats

Originally Posted by GenoTex
speakin' of mats...

anyone else have the problem of (and a solution to) the driver's side mat 'peeling back' and curling up at the 'left foot' extension ?? The 'tongue' that sticks up ... thanks.
What I did was install a flanged dead pedal, AMG style(shiny w/flat rubber pads). I installed so the bottom is up from floor just enough to slip that curly extension up under. My mat wasn't doing the curling thing and I did this because I wanted a dead pedal. But this might be a good solution for you other than buying new mats. Bob
 
Reply
Old Sep 4, 2010 | 12:58 PM
  #19 (permalink)  
Joliet John's Avatar
Senior Member
Joined: Jul 2010
Posts: 812
Likes: 5
From: Joliet, IL
Default Re: Floor mats

Originally Posted by GenoTex
speakin' of mats...

anyone else have the problem of (and a solution to) the driver's side mat 'peeling back' and curling up at the 'left foot' extension ?? The 'tongue' that sticks up ... thanks.
The mats I bought came with a piece of Velcro for that spot. Got them here:

LLOYD® - Ultimats™ Custom Floor Mats
 
Reply
Old Sep 5, 2010 | 12:39 PM
  #20 (permalink)  
GenoTex's Avatar
Joined: Dec 2003
Posts: 220
Likes: 0
From: Wizzzzzzzzzconsin
Default Re: Floor mats

Thanks for the replies
 
Reply



All times are GMT -4. The time now is 02:29 AM.