*Needed* 20 to Pre-order Wavetrac LSD for SLK32/SRT-6
UPDATED 7/29/2011
Details: Product: Wavetrac LSD for SLK32 & 320/SRT-6 & N/A (Wavetrac® Differentials - Technical Information - © Autotech Corp. All rights reserved.) Dealer: Unitrax - Anahiem, CA (POC: Devin King 1-800-622-4327) * You will need to have it installed it in your current housing w/ stock ring/pinion. Unitrax can do installs also. Cost: apx. $1100 + install Shipping began around 15 Jun 2011 and will take apx 45 days to fill all orders. *NOTE: If you have bolt-on axles (pre '03 SLKs and pre '05 Crossfires), you will be on-hold pending a solution. Autotech is testing a possible solution. It's looking like the stub axles will need to have the c-clip retaining grove machined to accept the snap-ring. For those that don't know, this replaces the rear differential center carrier (spider gear assembly) that catastrophically fails. You will still use you stock housing, bearings and ring/pinion. Feel free to contact Devin with other tech questions I will keep this 1st post updated as new info arrives. ** If there are initials next to your screen name, then I have verified your real name with the deposits** Buggin -- AB -- INSTALLED daithi2 -- HD -- DELIVERED MikeR -- MR -- DELIVERED amx1397 -- JB -- INSTALLED oledoc2u -- WH -- DELIVERED (x2) velociabstract -- LH -- INSTALLED 32Krazy! -- SR -- INSTALLED BigKid -- JR -- DELIVERED Squirrel Crusher -- DB -- DELIVERED Leptronjohn -- DELIVERED Beaner -- BL -- INSTALLED importlabsrt -- BT -- INSTALLED Coyote -- WE -- DELIVERED Dementors -- JB -- DELIVERED Wedge -- SB -- DELIVERED Waldig -- GW -- INSTALLED Sik Srt-6 -- JL -- DELIVERED rcompart -- RC -- DELIVERED MrSix -- DELIVERED scsponger31 -- DELIVERED tri_zombie -- DELIVERED brian_omeara07 -- BO -- DELIVERED PA/XFIRE -- LS -- INSTALLED KrzyFast -- PM -- DELIVERED texas t -- DS -- DELIVERED Tom2112 -- TD -- DELIVERED ckovach -- CK -- DELIVERED STANDBY LIST: Kolevski -- JK ***The above list is of those that have made deposits (as far as I know) and may not be completely inclusive to all that have made deposits. This list was originally intended to gauge an interest to see if we could get enough orders to build a Wavetrac LSD. Unitrax has the official list of all deposits taken.*** NOTE: Credit Cards will be run for the the other half when your unit is shipped... -------------- CONTACT INFO FOR DEPOSITS/ORDERING/QUESTIONS: Devin B. King UNITRAX Drivetrain, Inc. 1280 North Sunshine Way Anaheim, CA 92806-1746 devin@gounitrax.com 714.630.4327 800.622.4327 Fax: 714.630.5851 |
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Put me on the list. I'm in.
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
I tried to post on MBworld.org and I got an infraction and they deleted my post in 5 minutes. Wow. They don't mess around. I'm a bit in shock. I'm a wanted criminal. Good luck getting the word out the the C32 owners.
Les |
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Buggin, I'm taking this as any good mechanic can do this install, correct? Cause I'm not going to CA....lol....
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Originally Posted by oledoc2u
Buggin, I'm taking this as any good mechanic can do this install, correct? Cause I'm not going to CA....lol....
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
doc i spoke with allen about this and you are correct. needs to be a qualified mech as backlash is critical. im going to check with a shop i know and see what the tital install cost would be
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
I have a mechanic...just wanted to make sure there isn't something special that needs to be done...
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Originally Posted by oledoc2u
I have a mechanic...just wanted to make sure there isn't something special that needs to be done...
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
thanks Rudy...need to save quickly for this mod...I had something else I was working on...but I quess I will see if I can pull this one off...but the $$$$ she is short right now...
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Originally Posted by oledoc2u
thanks Rudy...need to save quickly for this mod...I had something else I was working on...but I quess I will see if I can pull this one off...but the $$$$ she is short right now...
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Originally Posted by oledoc2u
I have a mechanic...just wanted to make sure there isn't something special that needs to be done...
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Originally Posted by SRT4man
Doc, I am thinking of picking one of these up also. I could probably borrow some tools and even a gearbox tech from work (Xtrac) to help with the install. I will have them look at the website and check it out. I know we could make a diff, but it wouldn't be anywhere near 1100 bucks.
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Just curious what are the limits of the wavetrac? Going to school atm... will have to see about raising the fundage whats the deadline on this buy?
|
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Ok guys newb here so be kind..........
Can I assume this is a problem for the srt's only and that the N/A x-fires don't suffer from this condition?? Thanks. |
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Originally Posted by glockster
Ok guys newb here so be kind..........
Can I assume this is a problem for the srt's only and that the N/A x-fires don't suffer from this condition?? Thanks. |
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
[quote=32krazy!]dont think DO IT!!! we can use all the members we can get. the more diffs made the better the price. the thing to consider is that this will fix the diff issue permanantly. it will take more than the hp made by our cars to break the wavetrac[/quote
Well, I can ask at work to design one for our cars and the engineers can draw it up. Will only probably need 6 to order to fill a batch and get the design started. I would guess they would run somewhere in the 8-12k range as far as price goes with full adjustability.;) We make driveshaft assemblies and gearboxes too if you want but racing parts are not going to be a cheap as consumer products. |
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
[quote=SRT4man]
Originally Posted by 32krazy!
dont think DO IT!!! we can use all the members we can get. the more diffs made the better the price. the thing to consider is that this will fix the diff issue permanantly. it will take more than the hp made by our cars to break the wavetrac[/quote
Well, I can ask at work to design one for our cars and the engineers can draw it up. Will only probably need 6 to order to fill a batch and get the design started. I would guess they would run somewhere in the 8-12k range as far as price goes with full adjustability.;) We make driveshaft assemblies and gearboxes too if you want but racing parts are not going to be a cheap as consumer products. |
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
[quote=SRT4man]
Originally Posted by 32krazy!
dont think DO IT!!! we can use all the members we can get. the more diffs made the better the price. the thing to consider is that this will fix the diff issue permanantly. it will take more than the hp made by our cars to break the wavetrac[/quote
Well, I can ask at work to design one for our cars and the engineers can draw it up. Will only probably need 6 to order to fill a batch and get the design started. I would guess they would run somewhere in the 8-12k range as far as price goes with full adjustability.;) We make driveshaft assemblies and gearboxes too if you want but racing parts are not going to be a cheap as consumer products. |
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
heres some reading for ya'll
Wavetrac® Differential - A torque biasing differential with a difference |
Re: * Needed * 20 to Pre-order Wavetrac LSD fro SLK32/SRT-6
Originally Posted by 32krazy!
heres some reading for ya'll
Wavetrac® Differential - A torque biasing differential with a difference The Wavetrac is now available for LX platform SRT8 models: Charger, 300C, Magnum, and Challenger through 2008. It will also fit 5.7L Automatic LC/LX/LE cars from 2009 onwards. This is also suitable for 215 axle Mercedes AMG "55" and "63" models. Find a dealer near you, or go to Applications and buy online. |
All times are GMT -4. The time now is 08:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands