Hi,

Is this a good price?
Will the ECU tune be good? I would probably add a dual CAI aswell. Can they fine tune it so it recognises the CAI aswell?or is the ECU tune always the same?Anyone used the tune cable for 2005 SRT6? says its only good for after 2006..

185 or 181Pulley and tune

Eurocharged Remote Tuning Cable

Have a good evening gents & ladies,.

 

Eurocharged will do a great job for you, and yes.... they can and will adjust for the dual CAI. Just let them know all mods, and they will know how to adjust for them. As you can see from my signature, I have a Eurocharged tune, and I am very pleased with it.

 

[quote=FUBU]Hi,

"Is this a good price?"

Yes, it's a good price. You will be a happy man if you do this. Skoal

 

[quote=dinasrt]What is the 0-60 time on these honeys stock? What will it do after the tune with the above mentioned kit? (dual CAI from NW, ECU tune from EU CH + pulley kit)

BTW, difference between 185 and 181 pulley? what is best?

"Skål" cheers.

 

Did you do a dyno? i guess then they can tweak it even better... I am just scared that the ECU tune won't be customised for my car.. should I try to find a fine tuner here i Sweden? I guess i can buy a Kleemann kit for $3000 and get 400 bhp.
1000$ for ecu and pulley, + 800$ for dual CAI .. would give me approx the same?

 

[quote=FUBU]
"BTW, difference between 185 and 181 pulley? what is best?"

The difference is 4mm. As to which one is best? Only you can make that decision. There are several
threads here that you need to search for and read. It may take several hours or even days depending on how much spare time you have. And then after you do all that research, you may decide that you really want a 178, not a 181 or 185. Or, you may find out that after all that research, you still don't know which one you want. But, good luck w/ your decision. Could you let us know which one you pick and why? Skoal

 

[quote=dinasrt]I have been reading and so forth and all I understand is that the mm change alters where, at what rpm, the car pulls better... or am I wrong? Hmm I am coming from a N/A so I guess the SRT6 stock will do good this summer. (might buy parts when I am in FL later this year due to cheap dollar. )

Which one are you using?

 

[quote=FUBU]according to kleemann here in sweden they say 178mm is the best together with oem cooling of compressor.

 

[QUOTE=FUBU]Key word there being with OEM Cooling. Many of us that have gone with a 181mm or 185mm pulley have upgraded the cooling with a larger heat exchanger, etc.

...a lot of the guys running 178mm pullies are also running upgraded cooling. It just helps keep the added power no matter what size pulley you decide to run.

 

hey guys, our $999 deal is back on! Get then while they last!!!

181 or 185 and tune ftw!!

 

I want to purchase the S/C pulley. Crank pulley is to time consuming and complicated to install. Easier with a code 3 type of S/C pulley. Hit us with a release date?

 

+1........

 

I'd buy one today!

 

Yes, I did a dyno tune, but with all the knowledge that EC has on tuning these cars, I would not hesitate on getting a remote tune from them. Oh, and I do love my C3 pulley.... not that I would not consider a 178 or 181.

 

I love not having to change my cooling from stock with the code-3 pulley, cai and tune. I still pinch myself from the results. The 178mm crank pulley should be close to the Code-3 pulley performance wise. Good luck on whatever you do.

 

Are EC going to start selling these babies soon?

 

Patience; and don't worry, you'll be the last to know.

 

Word travels far. But by the time it makes it across the pond they are all gone

 

I'm after a Code3 SC Pulley or a Stock Pulley. PREFER Code3.

My updated offer is:

USD600 for a Code 3 Pulley (gen 2) with or without bearing
USD500 for a Code 3 Pulley (gen 1) with or without bearing
USD400 for a Stock Pulley with or without bearing

*Not interested in Alumin. Gen 3 sorry.
I'm in Sydney, Australia, so will have to add cost of freight of 1.205KG item by air.

Please PM me if interested. I'm not going to make this a public auction

Thanks.

 

I would simply contact eurocharged and ask them to make them. They would be able to sell about 100 pcs within the first month.