not the top ones but the bottom ones - shown in attach (upside down).
I normally shop through AutohausAZ - but they dont seem to carry them
Parts.com have a part number for the lower left (item 3) - but I'm not sure if they the one they show as the right one (item 2) is the "right lower" as opposed to the "right upper".
Auto Parts - Parts.com, For Every Part of Your Life

can anyone confirm?

 

#2 is the upper gasket. #3 is the lower gasket and are usually sold as a pair. Left and right are identical, you just flip one over.

Here's a VR version at Autozone (yeh, I know, I know)

 

I have studied them and they are the same part for the NA and SRT. That's what the list says.
Right and left are the same part.
Chrysler part is 05096513AA.
MB part is 112 141 20 80 (I think this is it, I checked it out online)
Another number is MB 112 141 10 80 (old number)
Google is our friend.

 

Yes, that is the correct MB part number (1121412080)...

 

it seems parts.com dont ship internationally
does anyone knwo if autozone does?

later that day.....ooops...it appears autohausaz have that one....thanks a mill.....getting ready for my potato wrap and air gap procedure..+ maybe even some forced cooling between HX and block...if I can pull it off over the next few months....
http://www.autohausaz.com/search/pro...=W0133-1641340,
and even later.....however it appears to be the only one they come up with ....

so....to be sure to be sure.....the PN for the upper gasket/s...?

 

Chrysler 05143103AA
MB 112 098 00 80

 

I saved the number the last time I ordered a set. (upper gaskets) There's nothing like a photo to take away any doubt.

Les

 

A good source for MB part numbers.
Pelican Parts

Select year 2004.

 

+1 on Pelican Parts

 

Mercedes Lower Intake Manifold Gasket Set

i have a few sets in stock, if your country is not listed on our shipping choices, shoot me an email

btw, #5 in that drawing is now on backorder though both mercedes and dodge, i have a few left here though. gotta come up with a solution to that issue yet.

also, yes the lower IM gaskets on the srt6/slk32/c32 are the same gasket as used on the NA intake manifold.

if you have made it to the point of needing the lower IM gaskets, you need all of these to go with it, look thru the picture and see what your missing.
http://www.needswings.com/IC-install...gasketset.aspx

 

thanks all.....
...that's one expensive syringe/goo dispenser....
the injector clean/check is also on the list (if I dont go larger injectors straight up).....alternate thread.