Newbie Registration of your SRT6 VIN#
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 2,509
Likes: 206
From: West Chester, PA.
Re: Newbie Registration of your SRT6 VIN#
Thanks for your response to this thread. Even though you did not mention that it is a coupe, the 7th digit in the VIN# of "9" indicates its a coupe. The VIN# already existed in the database, I added your forum name to the existing line. The last owner I had listed was Pickersville. I hope the prior owner gave you a detailed history of those 204K miles on the ODO, which would be critical, related to the prior maintenance.
Welcome to the SRT6 family and this site has a wealth of information (15 years) related to the maintenance and performance options, with NeedsWings as the primary supplier.
Enjoy!
Dennis
DTMenace
Joined: Jun 2020
Posts: 2
Likes: 0
From: North Carolina
Re: Newbie Registration of your SRT6 VIN#
No service paperwork to it. But drove it 300 miles home. Went through the car and changed oil, trans fluid and filter, supercharger oil, serpentine belt, iridium plugs, wires, and coils. Also replaced sc pulley with slightly smaller diameter since pulley was bad and idler pulley. K&N air filters, gutted front cats, new battery, vapor purge solenoid, crankshaft sensor, fuel filter, ceramic brake pads and bleed. Now I have paperwork in the glove compartment and expect this to last to 300,000 before rebuild at least, lol.
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 2,509
Likes: 206
From: West Chester, PA.
Re: Newbie Registration of your SRT6 VIN#
No service paperwork to it. But drove it 300 miles home. Went through the car and changed oil, trans fluid and filter, supercharger oil, serpentine belt, iridium plugs, wires, and coils. Also replaced sc pulley with slightly smaller diameter since pulley was bad and idler pulley. K&N air filters, gutted front cats, new battery, vapor purge solenoid, crankshaft sensor, fuel filter, ceramic brake pads and bleed. Now I have paperwork in the glove compartment and expect this to last to 300,000 before rebuild at least, lol.
Without the prior maintenance history, it appears you've addressed all of the issues that needed to be addressed due to the higher miles on the ODO. That gives you the assurance the SRT6 should run without any issues for quite some time into the future. Keep an eye on that SC pulley, since there have been issues with some after market pulleys imploding (especially the aluminum ones). Use the search button at the top of the main page with the words, SC Pulleys, there are several threads about the consequences related to the aftermarket pulleys. The ASP 178 Crank pulley is the safest way to go, no reported failures.
Enjoy your SRT6....
Dennis
DTMenace
Last edited by DTMenace; Jan 30, 2021 at 06:54 PM.
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 2,509
Likes: 206
From: West Chester, PA.
Re: Newbie Registration of your SRT6 VIN#
griffin
I responded to the other thread message....
Dennis
DTMenace
I responded to the other thread message....
Dennis
DTMenace
Senior Member
Joined: Nov 2006
Posts: 6,639
Likes: 776
From: Orange County CA.
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 2,509
Likes: 206
From: West Chester, PA.
Re: Newbie Registration of your SRT6 VIN#
J&K SRT6
Thanks for the information, I've added the info to the existing line in the VIN# database and will appear at the time of the next publication in the near future.
Enjoy your SRT6, it's worth the wait!
Dennis
DTMenace
Thanks for the information, I've added the info to the existing line in the VIN# database and will appear at the time of the next publication in the near future.
Enjoy your SRT6, it's worth the wait!
Dennis
DTMenace
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 2,509
Likes: 206
From: West Chester, PA.
Re: Newbie Registration of your SRT6 VIN#
Pdxcrossfire
Welcome to the Crossfire Forum, specifically to the SRT6 section. This site has a wealth of information (16+ years) related to your SRT6's maintenance or modifications. In order to look for a specific scenario, please use the SEARCH button at the top of the front page, type in your question(s).
I've added your forum name to the VIN# database and it will appear at the next time I publish an update.
Enjoy your SRT6, it's a great car.....
Dennis
DTMenace
Welcome to the Crossfire Forum, specifically to the SRT6 section. This site has a wealth of information (16+ years) related to your SRT6's maintenance or modifications. In order to look for a specific scenario, please use the SEARCH button at the top of the front page, type in your question(s).
I've added your forum name to the VIN# database and it will appear at the next time I publish an update.
Enjoy your SRT6, it's a great car.....
Dennis
DTMenace
Joined: May 2021
Posts: 7
Likes: 1
From: Portland
Re: Newbie Registration of your SRT6 VIN#
Pdxcrossfire
Welcome to the Crossfire Forum, specifically to the SRT6 section. This site has a wealth of information (16+ years) related to your SRT6's maintenance or modifications. In order to look for a specific scenario, please use the SEARCH button at the top of the front page, type in your question(s).
I've added your forum name to the VIN# database and it will appear at the next time I publish an update.
Enjoy your SRT6, it's a great car.....
Dennis
DTMenace
Welcome to the Crossfire Forum, specifically to the SRT6 section. This site has a wealth of information (16+ years) related to your SRT6's maintenance or modifications. In order to look for a specific scenario, please use the SEARCH button at the top of the front page, type in your question(s).
I've added your forum name to the VIN# database and it will appear at the next time I publish an update.
Enjoy your SRT6, it's a great car.....
Dennis
DTMenace
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 2,509
Likes: 206
From: West Chester, PA.
Re: Newbie Registration of your SRT6 VIN#
STR6
Welcome to the Crossfire SRT6 family of owners. I've added your forum name to the existing line in the VIN# database, it will appear at the next publish date. This site has a wealth of information related to maintenance or speed mods.
Enjoy your SRT6.....
Dennis
DTMenace
Welcome to the Crossfire SRT6 family of owners. I've added your forum name to the existing line in the VIN# database, it will appear at the next publish date. This site has a wealth of information related to maintenance or speed mods.
Enjoy your SRT6.....
Dennis
DTMenace
Joined: Jun 2007
Posts: 68
Likes: 0
From: NY
Re: Newbie Registration of your SRT6 VIN#
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 2,509
Likes: 206
From: West Chester, PA.
Re: Newbie Registration of your SRT6 VIN#
Looks like a possible rebuild, but there maybe hidden damage. Finding a quarter panel replacement and qualified repairs may become even more complicated due to structural issues.
Just another parts car?
Thanks for another find.....
Dennis
DTMenace
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 2,509
Likes: 206
From: West Chester, PA.
Re: Newbie Registration of your SRT6 VIN#
Welcome to the SRT6 family of Crossfire owners.
I've added your forum name to the existing line in the VIN# database and it will appear in the August 2022 published update with the history of the prior owner. This forum has a wealth of information to maintain your SRT6, as well as sources for performance upgrades.
I've also corrected the color from previous information from a Sapphire Siler Blue to Graphite Gray in the database.
Thanks for your information and enjoy your SRT6....
Dennis
DTMenace
Last edited by DTMenace; Jul 23, 2022 at 12:50 PM.
