Crank case vent hose
Ran across an interesting predicament yesterday. A month or so ago, I noticed the crank case vent hose was torn at the end that connects to the intake.
https://farm9.staticflickr.com/8386/...f83bdf2931.jpg I removed the driver's side intake as well as the damaged hose. https://farm9.staticflickr.com/8106/...4b68c6785f.jpg I consulted my trusty parts diagram and chose item #6. https://farm9.staticflickr.com/8097/...d053b9ae_b.jpg Ordered it and received the new part. Looks just like the one in the diagram, but nothing like the part that's on the car. Bends are wrong and it doesn't fit (too long). Original Hose https://farm9.staticflickr.com/8367/...7aefb8a0_b.jpg New Hose https://farm9.staticflickr.com/8390/...027fcc6a_b.jpg The part numbers match up and the hose looks the same as the one in the diagram, but nothing like the original. I checked the parts diagram for both the NA and SC models and they were the same. Any ideas on why there's a difference between the diagram and the actual motor? This is on an '05 SRT Roadster.... Thanks in advance! |
Re: Crank case vent hose
Originally Posted by rtcarlin
(Post 724561)
Ran across an interesting predicament yesterday. A month or so ago, I noticed the crank case vent hose was torn at the end that connects to the intake.
I removed the driver's side intake as well as the damaged hose. I consulted my trusty parts diagram and chose item #6. http://farm9.staticflickr.com/8097/8...d053b9ae_b.jpg Ordered it and received the new part. Looks just like the one in the diagram, but nothing like the part that's on the car. Bends are wrong and it doesn't fit (too long). Original Hose New Hose The part numbers match up and the hose looks the same as the one in the diagram, but nothing like the original. I checked the parts diagram for both the NA and SC models and they were the same. Any ideas on why there's a difference between the diagram and the actual motor? This is on an '05 SRT Roadster.... Thanks in advance! I'm just going from memory of myNA. |
Re: Crank case vent hose
Originally Posted by onehundred80
(Post 724565)
The diagram is for the NA and the hose goes down to the venturi at the top of the throttle body. But the SRT one just goes to the intake as you show.
|
Re: Crank case vent hose
Originally Posted by rtcarlin
(Post 724566)
I was wondering about that, but saw that under the "Engine" column, it listed EGZ as well. Any help with the proper diagram would be greatly appreciated. I found the diagram under the section entitled "Group - 3.2LS Engine 3.2L SOHC 18 Valve Supercharged V-6 [EGZ]".....
|
Re: Crank case vent hose
Take a look at this page and see if any of these look right to you :
Discount Auto Parts and Accessories - PartsGeek |
Re: Crank case vent hose
:confused: In any configuration, can the hose you bought be spun/flipped then cut to be close enough to fit? Just a thought. :confused:
|
Re: Crank case vent hose
Originally Posted by GraphiteGhost
(Post 724629)
:confused: In any configuration, can the hose you bought be spun/flipped then cut to be close enough to fit? Just a thought. :confused:
Of course, I'll no longer need the hose once I get the Needswings CAI... ;) Just about have the wife talked into it.... |
Re: Crank case vent hose
I do need this hose, just noticed mine is cracked in two spots. Anyone find the MB part number?
|
Re: Crank case vent hose
1 Attachment(s)
Originally Posted by Timesnow
(Post 739793)
I do need this hose, just noticed mine is cracked in two spots. Anyone find the MB part number?
|
Re: Crank case vent hose
Originally Posted by robby363
(Post 739858)
The MB part# on the hose is 112 018 0782 it was superseded with 112 018 1882 HOSE. CYLINDER HEAD COVER; Hoses; INTAKE MANIFOLD. Mercedes # 1120181882, 1120180782
|
Re: Crank case vent hose
Have you considered getting a catch can from Needswings? http://www.needswings.com/ProductImages/cc1.jpg
|
Re: Crank case vent hose
New Bie so please bare with me, what does the catch can do for me?
|
Re: Crank case vent hose
Originally Posted by Timesnow
(Post 739936)
New Bie so please bare with me, what does the catch can do for me?
This explains it really well. |
Re: Crank case vent hose
A couple things to point out as I read through this post:
1) A catch can setup does not eliminate the cracked hose in question (item 6), it eliminates items 4 + 5. 2) A DCAI setup from Needswings does not eliminate said hose either (at least not the version I bought from them) |
Re: Crank case vent hose
Originally Posted by Buggin
(Post 740530)
A couple things to point out as I read through this post:
1) A catch can setup does not eliminate the cracked hose in question (item 6), it eliminates items 4 + 5. 2) A DCAI setup from Needswings does not eliminate said hose either (at least not the version I bought from them) That's the hose that goes to the rearward DS rocker cover nipple. On the SCAI it is replaced with a hose that goes to a nipple on the intake at the bottom on the PS. |
Re: Crank case vent hose
This seems to be a right kit to replace all the breather hoses and the price is good:
Engine Crankcase Breather Hose Kit CRP ABK0131 fits 98-05 Mercedes E320 |
Re: Crank case vent hose
1 Attachment(s)
I've found that Pelican Parts has one of the better selections of molded cranckcase breather hoses for the Crossfire/M-B cars. Go to Pelican Parts and search using a 2004 Model Year Mercedez-Benz, then select the SLK series. Click on the SLK32 AMG. Once you're in, go to Engine / Oil Circulation / Cranskcase Ventilation. The only hose shown looks like the one you're looking for. (See attached file)
All the other molded hoses typically needed are listed under the SLK320. |
Re: Crank case vent hose
Originally Posted by gman
(Post 886307)
This seems to be a right kit to replace all the breather hoses and the price is good:
Engine Crankcase Breather Hose Kit CRP ABK0131 fits 98-05 Mercedes E320 :) GREAT price for all 4! :)
Originally Posted by dedwards0323
(Post 886317)
I've found that Pelican Parts has one of the better selections of molded cranckcase breather hoses for the Crossfire/M-B cars. Go to Pelican Parts and search using a 2004 Model Year Mercedez-Benz, then select the SLK series. Click on the SLK32 AMG. Once you're in, go to Engine / Oil Circulation / Cranskcase Ventilation. The only hose shown looks like the one you're looking for. (See attached file)
All the other molded hoses typically needed are listed under the SLK320. :confused: Hmmmm, one hose 31 bucks, all 4 for 25 bucks with free shipping? Any reason not to get the full set for @ 25 bucks? I would ask someone who bought these, to post here if they are all the right sizes... :confused: . |
Re: Crank case vent hose
Originally Posted by GraphiteGhost
(Post 886348)
:) GREAT price for all 4! :)
:confused: Hmmmm, one hose 31 bucks, all 4 for 25 bucks with free shipping? Any reason not to get the full set for @ 25 bucks? I would ask someone who bought these, to post here if they are all the right sizes... :confused: . If you want the Chrysler part you can always go to the stealer and ask for the part, then you will receive the Mercedes OEM part at a greatly increased price with the Chrysler sticker showing you the Chrysler part number stuck over the Mercedes label which has the Mercedes part number on it. You could buy the $25 set from China but the stealers kids want to go to Harvard and learn where their father is losing money by not charging more for his services. ;) |
Re: Crank case vent hose
Originally Posted by onehundred80
(Post 886350)
If you want the Chrysler part you can always go to the stealer and ask for the part, then you will receive the Mercedes OEM part at a greatly increased price with the Chrysler sticker showing you the Chrysler part number stuck over the Mercedes label which has the Mercedes part number on it.
:confused: I sometimes wonder where MB actually get their hoses from. Does anyone REALLY know? Maybe, the MB part (re-labeled and sold by FCA), is a china knockoff in a MB box before it is labeled a MB part... :confused: . |
All times are GMT -4. The time now is 12:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands