I have a post in the marketplace WTB section of the forum but thought I would also put up a post here. Does anyone have a pair of SRT6 front springs laying around that they want to turn into $$?
The springs I need will have a single yellow dot on each spring as pictured . . .

 

Bob

Outlined below are the stats on Crossfire Coil Spring Rates for all modelsSRT6 Coupe's & Roadsters have slightly different spring rates

The SRT6 Coupe’s spring rates are 451 lb./in. in the front and 480 lb./in. in the rear, while the Roadster’s are 434 lb./in. in the front and 491 lb./in. in the rear.

Compared to 303 lb./in. front and 337 lb./in. rear on the original Crossfire Coupe and Roadster models (Limited & Base).

Hope this info helps....

Dennis
DTMenace

 

Hi Dennis, Thank you for your post and for your effort to help. I recently found that SRT6 spring rate information in a forum post. I have it written on a piece of paper right in front of me on my desk . . .

 

11/12/20 - I found these SRT6 front coil springs available new (at a ridiculously high price) and ordered them. They are shipped and on the way to me. We'll see . . .