Live in OHIO and need a from plate bracket, any suggestions, please

 

Here is a nice one a member designed and fabbed up

https://www.crossfireforum.org/galle...php?photo=7583

 

I have an unused OEM I'll let go cheap.
PM me.

Max

 

I live in California (which is a two plate state) and also refuse to ruin a perfectly good front bumper cover. The original OEM bracket is about $30 from the dealer but it requires two holes to be drilled front and centered in the brumper cover. I have been thinking of buying a stock length of aluminum "L" channel and fabricating something that could be mounted on the underside of the bumper above the lower grill. It could be centered or offset. I'd say centered becuase I'm **** about symetry. Regardless, it shouldn't be that hard to do.

 

Here is a link to some pics of what I did. I wrote up what I did and posted it under the close up picture that DaveBrave linked above.

https://www.crossfireforum.org/galler...ser/12747/sl/c

I think it looks great. Only have had it scrape once on a steep ramp up into a parking lot. Enjoy the Driving!