Cleaning exhaust tips
I cleaned my exhaust tips for the first time since I got her at the end of September(I know, I'm a terrible person). Used some simple green(which has the pleasant aroma of Jager), steel wool, and NEVR-DULL. Did not see as drastic of results as I had hope on the inside of the tips, but they look 100% better from a distance(which is good enough for me because I'm probably the only one who will stare at them from 2feet away).
Before: https://www.crossfireforum.org/galle.../IMG_04581.jpg https://www.crossfireforum.org/galle.../IMG_04591.jpg After: https://www.crossfireforum.org/galle.../IMG_04611.jpg https://www.crossfireforum.org/galle.../IMG_04621.jpg |
Re: Cleaning exhaust tips
I got tired of cleaning the inside of them so I painted them black. Now I only have to clean the edges.
|
Re: Cleaning exhaust tips
The insides of mine are black too, but I didn't have to paint them lol. I'm not sure that I will be able to get them clean.
|
Re: Cleaning exhaust tips
Originally Posted by noles
The insides of mine are black too, but I didn't have to paint them lol. I'm not sure that I will be able to get them clean.
Just try!!! |
Re: Cleaning exhaust tips
I think it makes a big difference having them cleaned and polished like this. Looks good.
|
Re: Cleaning exhaust tips
I thought the SRT was black painted and the n/a just dirty..
|
Re: Cleaning exhaust tips
Originally Posted by WalkMan5
I cleaned my exhaust tips for the first time since I got her at the end of September(I know, I'm a terrible person). Used some simple green(which has the pleasant aroma of Jager), steel wool, and NEVR-DULL. Did not see as drastic of results as I had hope on the inside of the tips, but they look 100% better from a distance(which is good enough for me because I'm probably the only one who will stare at them from 2feet away).
Before: https://www.crossfireforum.org/galle.../IMG_04581.jpg https://www.crossfireforum.org/galle.../IMG_04591.jpg After: https://www.crossfireforum.org/galle.../IMG_04611.jpg https://www.crossfireforum.org/galle.../IMG_04621.jpg TerryR |
Re: Cleaning exhaust tips
As my tips are not chrome and were very mistreated abrasive is exactly what I was looking for. No amount of polish, cleaner, or any kind of cloth was going to remove the soot.
|
Re: Cleaning exhaust tips
Am I the only one on this forum that credits Top Tier gasoline for my clean tips?
|
Re: Cleaning exhaust tips
Originally Posted by FUBU
I thought the SRT was black painted and the n/a just dirty..
There was another SRT owner with the same. https://www.crossfireforum.org/galle.../diffuser1.JPG |
Re: Cleaning exhaust tips
Originally Posted by stlouistrucker
Am I the only one on this forum that credits Top Tier gasoline for my clean tips?
|
Re: Cleaning exhaust tips
Corn Soot!:p
Use non Ethonal fuels. I know, from where. Just sayin:rolleyes: roadster with a stick |
Re: Cleaning exhaust tips
Originally Posted by BoilerUpXFire
I run only top tier gas - 93 only from Shell or BP and have to clean mine all the time.
|
Re: Cleaning exhaust tips
Originally Posted by stlouistrucker
BP is not a Top Tier gasoline.:(
Originally Posted by Franc Rauscher
Corn Soot!:p
Use non Ethonal fuels. I know, from where. Just sayin:rolleyes: roadster with a stick |
Re: Cleaning exhaust tips
So in short,
With what should I clean my tips with? I somewhat find it nice having the tips dirty and just the edges clean... |
Re: Cleaning exhaust tips
I used Seapower Fiberglass Boat Cleaner and Wax applied to one of the small round Mothers polishing balls chucked in my power drill. It cleans, polishes and applies a coat af wax. I have not had to clean the tips in several months. What little was there the last time came out easily with a paper towel dampened with 409 and vinegar.
|
Re: Cleaning exhaust tips
The real key to this, like anything else, is to stay on top of it. A minute of preventive maintenance every time you wash your car is a whole lot easier, and keeps things looking better longer, than doing a major correction after you've let it go to heck in handbasket. Any decent metal polish will do - Meguiar's, Mother's, NevrDull, etc. You shouldn't need a tool like the Mother's Power Ball or Meguiar's DynaCone if you keep up with it.
Originally Posted by cheap ride
I used Seapower Fiberglass Boat Cleaner and Wax applied to one of the small round Mothers polishing balls chucked in my power drill. It cleans, polishes and applies a coat af wax. I have not had to clean the tips in several months. What little was there the last time came out easily with a paper towel dampened with 409 and vinegar.
|
Re: Cleaning exhaust tips
Amen, Mike-In-Orange. If the owner before me had taken care of the tips and if I had kept up with them I would have had no problems. It's always much easier to prevent than to correct.
|
Re: Cleaning exhaust tips
Once I get the magnaflow there will be plenty of prevention ;)
|
Re: Cleaning exhaust tips
The Magnaflow exhaust is so easy to take care of. I use a little Hot Rims Mag & Aluminum Polish on them with a clean, old terry towel and they come up great. If I'm doing a full on hard core detail on the car I grab the wool pad that comes with our Headlight Restoration Kit and spin that on a drill to give them maximum pop.
|
All times are GMT -4. The time now is 03:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands