Making my own stainless-steel exhaust!
These are the tips i'm going to use.
I ordered some things to make it complete,
so i just have to wait now!
If its done i'll add more pics and a sound-clip!

 

Can't wait to see it. BTW, where did you find those tips?

 

I found the tips in a local tuning-shop (In Belgium).
It just costs me 50 € and its made of stainless steel!
The muffler i go to make by myself, its easy!

As soon as its finished i post some pics!

See Ya

 

What diameter piping are you going with? What flavor of SS are you using?

 

I'm using a pipe with a diameter of 60 cm (24 inch i think) and stainless steel 304!
Now my original exhaust is with a reflexion muffler and
the exhaust I'm going to make is with a absorption muffler!
The difference is that a reflexion muffler has more back pressure which isn't so good.
The absorption muffler gives more low frequency tones!

 

Nice job stepping up and making something yourself and who knows, maybe you could export them here for a truly unique product. Made by a Crossfire enthusiast for the Crossfire enthusiast.

 

That's not a bad idea. "Home Made Stainless Steel Exhaust".
In Belgium I won't have a lot of work. There are only 5
Crossfires on the road.

 

Keep us posted.

 

This morning i made my muffler and put the tips on but it still needs the finishing touches after everything is ready.

 

clean welds... what did you use for packing ? i like the stuff magnaflow has, it does not burn out as easily as the old steel wool looking packing...

 

I used packing of "Laser" exhaust-systems, it has a very good quality!

See the website: http://www.laserexhausts.com/en/index.html

 

i must say i am very impressed because i love custom made items like this. it just gives the car so much more personality when it is done...

 

Thanks

I always did that kind of thinks like making exhausts, tinting windows, place other bumpers,place "ICE" in the trunk and lowering on my cars, its a passion of mine! Even some of my friends and other people have also a "Jenzie-Custom-made Exhaust" under their vehicle! And it doesn't cost a lot of money when its custom-made! This exhaust just gonna cost me about 1OO€!

 

Nice work Jenzie! Just what I like to see, someone thinking for themselves and getting on and doing it. Most people would have just bought a ready-made silencer and welded the tips on.

 

Thanks Woody!
Its just that everybody has his own job, don't ask me something about computers and stuff like PLC and electronical things. Know what i mean?

 

The next step is finished! Now all i have to do is hang the pipe and the muffler under the car and connect the pipe to the muffler with 2 turnings!

 

Nicely done Jenzie... can't wait to see those tips in the gap!

 

Thanks Timelord!
By the end of the weekend, everything is done I guess!
Than I'll post some pics of the result!

 

Finally everything is done. I finished my exhaust this morning!
I have taken some pics and let my girlfriend drive so i could make a soundclip!
I think the noise is almost the same as a Magnaflow or Borla exhaust!

http://www.youtube.com/watch?v=agPzmqFOoPU clip 1
http://www.youtube.com/watch?v=sJBdQFnBKB4 clip 2

 

That is SWEET Jenzie!!! Great job!!!