Will this type air box fit?
I am looking for a MB air box, and have the opp. to get one that fits either a CL 500, or an S 500. Does this type fit our XFs?
Originally Posted by Pacemaker
I am looking for a MB air box, and have the opp. to get one that fits either a CL 500, or an S 500. Does this type fit our XFs?
If it's the V-6 I would guess not.
"I'll take that as a NO and keep looking. Thanks for your lilting reply.
and Thanks JHM2K as well. We may now close this thread.
If I recall correctly, the airbox portions are the same size in dimension, its only the front piece that is slightly longer.... but the physical airbox is the same, just larger filters.
The 500 is a V8. But if it uses the two piece set-up, the rear airbox will fit. Then all you have to find is a V6 front section, or called the actual engine cover. If you can get a good deal on it, go for it. The front v6 covers come up on ebay quite often.



James



James
Last edited by James1549; Aug 19, 2010 at 07:27 PM.
If ithis is the one you want, the rear section will fit. The front is for a V8, not sure how it would look or fit on an Crossfire.
Mercedes CL500 S500 complete engine cover and intake : eBay Motors (item 260651272320 end time Aug-22-10 13:05:17 PDT)
James
Mercedes CL500 S500 complete engine cover and intake : eBay Motors (item 260651272320 end time Aug-22-10 13:05:17 PDT)
James
Thanx for your gracious and illustrated replies INFINITE and TWO C TER. Much appreciated. May get the one on the link you provided and look for the 6 cyl. front later..
Thanx again guys.
Thanx again guys.
Originally Posted by James1549
If ithis is the one you want, the rear section will fit. The front is for a V8, not sure how it would look or fit on an Crossfire.
Mercedes CL500 S500 complete engine cover and intake : eBay Motors (item 260651272320 end time Aug-22-10 13:05:17 PDT)
James
Mercedes CL500 S500 complete engine cover and intake : eBay Motors (item 260651272320 end time Aug-22-10 13:05:17 PDT)
James
Thanks again for your help
PACEMAKER
Originally Posted by Pacemaker
Sadly, the back did NOT fit...
The clips were not in the right place, too far forward and outboard of the XF rubber mounts. (neither did the front
). I'll keep looking.
Thanks again for your help
PACEMAKER
Thanks again for your help
PACEMAKER
Originally Posted by Infinite
If I recall correctly, the airbox portions are the same size in dimension, its only the front piece that is slightly longer.... but the physical airbox is the same, just larger filters.
Thread
Thread Starter
Forum
Replies
Last Post
Romio
Parts/Accessories for sale - Archive
2
Jul 24, 2015 07:04 AM
tom2112
Parts/Accessories for sale - Archive
4
Jul 12, 2015 04:41 PM
cx24724
Troubleshooting & Technical Questions & Modifications
2
Jul 12, 2015 11:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



