Eyebrow Lights...
Eyebrow Lights...
I read somewhere in a past thread where someone suggested replacing the white eyebrow lights with blue ones. Well, I did it. First, let me say that it is a pain in the @$$ to do, especially being that I wasn't about to take the whole headlight assembly out just to change the bulbs. But, after a few scrapped bloody knuckles I was able to replace them. It looks great when running just the parking lights and it adds a nice accent to the headlights when they are on. IMO, the subtle change was well worth it, plus I get a lot of compliments.
Join Date: Aug 2004
Location: Varina, Virginia (LI Transplant)
Age: 66
Posts: 2,444
Likes: 0
Received 4 Likes
on
3 Posts
Re: Eyebrow Lights...
Did you use LED's or regular bulbs, I used 5 LED Super Brite bulbs from http://www.superlumination.com/ & 100 watt PIAA halogens with Xpel yellow film for the fogs.
100wYellowFog_tint2.jpg
100wYellowFog_tint2.jpg
Re: Eyebrow Lights...
Originally Posted by slimjimd
First, let me say that it is a pain in the @$$ to do, especially being that I wasn't about to take the whole headlight assembly out just to change the bulbs. But, after a few scrapped bloody knuckles I was able to replace them. .
Re: Eyebrow Lights...
You will need to put a resistor in.
I believe http://superlumination.com/ sells them.
Or you will need a little black piece of electrical tape...
I believe http://superlumination.com/ sells them.
Or you will need a little black piece of electrical tape...
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)