well I can't get the hid bulbs in the headlight assembly and one of the bulb retaining clips has come completely out and I can't see up inside the headlight assembly to put it back. Can any one tell me what it takes to get the headlight assembly out? I've tried everything to not take the whole thing out but my car is a daily driver and I'm stuck at this point. PLEASE HELP!!!! Thanks in advance!!!!

 

still need help please!!!

 

There might be your answer...

https://www.crossfireforum.org/forum...ad.php?t=28555

 

thanks martosh but I already have both of those install guides and have religiously looked at them. I think I need little hands more than anything haha

 

To completely remove the lamp assemblies, remove the splash shield from the bottom of the car, (4 or 6 bolts?) then there are 4 bolts holding each housing in. 2 upper and 2 lower.

Good luck.

 

thanks I appreciate the help. That's what I ended up doing. took me a little while but got it done and the HID's are installed and good to go. Lots of cuts on the ol'e hands but I got some great pictures and I'll share them with the forum soon!!