Hatch rebadging dimensions
I have been thinking of removing the CROSSFIRE letters from the hatch.
I would like to have the positions of each letter in case I decide to reapply them. These are the sizes for a 2004 Coupe, Later models are located farther up from the hatch lip. The other sizes are within 1/16", rounded to the nearest 1/8". InfernoRedXfire has informed me that the 1.00" dimension is 1 15/16" (1.94") on the SRT's. This is to allow for the SRT-6 badge. The letters are vertical, but follow the profile of the hatch lip, which is 5/16-3/8" lower in the center. The letters are .73" high. http://i798.photobucket.com/albums/y...ETTERING-2.jpg |
Re: Hatch rebadging dimensions
My letters are 1 15/16" or 1.9375" from the bottom lip on my SRT roadster.
|
Re: Hatch rebadging dimensions
If I would ever remove mine, then want them put back on, I would just buy new, already spaced and set to go. Very easy.
James |
Re: Hatch rebadging dimensions
Originally Posted by InfernoRedXfire
My letters are 1 15/16" or 1.9375" from the bottom lip on my SRT roadster.
|
Re: Hatch rebadging dimensions
Originally Posted by James1549
If I would ever remove mine, then want them put back on, I would just buy new, already spaced and set to go. Very easy.
James |
Re: Hatch rebadging dimensions
Originally Posted by onehundred80
I'm cheap, not easy, but cheap none the less.:p
I see it as too much hassle to properly apply new adhesive and get every letter standing PERFECTLY straight upwards with no lean. James |
Re: Hatch rebadging dimensions
I am a metric man and finding these measurements hard to follow also how far apart is each letter from the next? I have a 2006 xfire by the way thanks :)
|
Re: Hatch rebadging dimensions
Originally Posted by lndac02
(Post 922131)
I am a metric man and finding these measurements hard to follow also how far apart is each letter from the next? I have a 2006 xfire by the way thanks :)
The 1" dimension is for the 2004 Crossfires and all the others have a 1.94" dimension. This allowed for the SRT label to go beneath it. https://cimg8.ibsrv.net/gimg/www.cro...4cf2eaaf9b.jpg |
Re: Hatch rebadging dimensions
Thanks 180. This is really appreciated. I cannot buy a new set because Chrysler is no longer making them and no seems to have NOS on ebay
Originally Posted by onehundred80
(Post 922133)
Sadly the photo had the sizes on it, I never noticed, I'll look for it.
|
Re: Hatch rebadging dimensions
Where in AZ are you? If near you can measure mine.
|
All times are GMT -4. The time now is 09:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands