Exterior Light Failure?!!?
So i just bought my Crossfire like last week and noticed the Exterior Light Failure warning was on in the dash. So i checked around the car and i noticed one of the side marker bulb was out. I replaced the bulb yesterday and now it turns on but the warning light in the dash is still on!!
. i checked all the lights around the car, even the plate lights and back up lights and they all seem to be working fine. Although my driver side headlight seems a little too low than the other or maybe its just not aligned with the passenger headlight. When i turn off my car and turn off the headlights, and open the door to exit, a warning beep starts and doesn't stop until i close the door. Could this be a sign that my headlight bulb is going out? can i reset the exterior light failure light?
. i checked all the lights around the car, even the plate lights and back up lights and they all seem to be working fine. Although my driver side headlight seems a little too low than the other or maybe its just not aligned with the passenger headlight. When i turn off my car and turn off the headlights, and open the door to exit, a warning beep starts and doesn't stop until i close the door. Could this be a sign that my headlight bulb is going out? can i reset the exterior light failure light?
what he said! I just took delivery of an 05 roadster 3.2 N/a. Headlight warning marker is on, but all lights are AOK. When I turn the switch to parking lights, the warning comes on. Is that going to be a loose parking bulb? Or something worse?
Have someone check your break lights while you step on the break pedel.
I too had the light out indicator on and could not find any lights not working. Then a neighbor who saw me drive by and stop at the corner, told me my driver's side brake light was out.
I too had the light out indicator on and could not find any lights not working. Then a neighbor who saw me drive by and stop at the corner, told me my driver's side brake light was out.
So it's on already and then comes on. How can that be?

Thread
Thread Starter
Forum
Replies
Last Post
Danyuhl
Troubleshooting & Technical Questions & Modifications
5
Nov 2, 2019 05:18 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




