Front Indicator not working.
Hi guys,
Well after 3.5 years of ownership of my Coupe I am still enjoying the car & hope to keep it for many years. One thing has become a problem though & I was hoping somebody on here could help please. Basically my drivers side front indicator has stopped working (the one situated with in front lights) & I have tested the bulb & it works fine. Can somebody point me in the direction of where this would be earthed as I think this would obviously need checking or is there something else I should be checking? Many thanks. |
Re: Front Indicator not working.
The contact(s) are most likely toast.
There is a thread here, somewhere, that shows a replacement unit. |
Re: Front Indicator not working.
If you inspect the two contact points on the outside of holder, and the one's in the headlight and see no physical damage, try cleaning them with a pencil eraser.
If the holder contacts are arched/damaged, you can sometimes repair that with a little extra solder. |
Re: Front Indicator not working.
Thanks for the replies guys. The contacts on both parts have been checked & cleaned up but still not working. In fact, the contacts look in really good condition.
|
Re: Front Indicator not working.
Put your volt meter on the contacts and see if you have power. Probably not if they look good but you will be sure then.
|
Re: Front Indicator not working.
Good idea. Will give this a try tomorrow. Thank you.
|
Check the mini fuse box on the side of the dash with the driver side door open. There is a fuse that handles the right parking lights and a fuse than handles the left.
|
Re: Front Indicator not working.
The bulb/socket in question is the turn signal bulb, not a parking light.
|
Re: Front Indicator not working.
Having all of Easter off work this will give me 4 days to get to the bottom of this annoying problem. I hate it when people stare at me because they think that I am not indicating to turn right!
|
Re: Front Indicator not working.
Just a quick update. Got the indicator working again by slightly bending up the contact on the housing where the bulb connects to. The contacts with in the headlight look burnt so not sure how long this fix will last as obviously something not right.
|
Re: Front Indicator not working.
What is not right is the overall piss-poor design. Nothing you can do about it.
|
Re: Front Indicator not working.
Couldn't agree more. The crappy British weather also can make things "difficult" at times.
|
Re: Front Indicator not working.
Originally Posted by boobles37
(Post 832152)
Just a quick update. Got the indicator working again by slightly bending up the contact on the housing where the bulb connects to. The contacts with in the headlight look burnt so not sure how long this fix will last as obviously something not right.
|
Re: Front Indicator not working.
Originally Posted by eightball200
(Post 832265)
I have had a similar fix working for about 3 months now. No indication of failure yet, dreading having to change that bulb now though.
Not sure on prices over there for new headlight but over here they are about £600. |
Re: Front Indicator not working.
Originally Posted by boobles37
(Post 832280)
Not sure on prices over there for new headlight but over here they are about £600.
In this case the maker is Valeo and this problem has come up before, so using Valeo and turn signal in the Google search we get posts on the problem. I know that a Valeo part was found, if it actually worked in the end I cannot remember. I found this part (CLICK) but someone said it did not fit even though it was the same part number. Compare the photo to your part. https://www.crossfireforum.org/forum...cket-60_12.jpg |
Re: Front Indicator not working.
Originally Posted by boobles37
(Post 832280)
Not sure on prices over there for new headlight but over here they are about £600.
|
Re: Front Indicator not working.
Xpel or Lamin-x, either one.
|
Re: Front Indicator not working.
Thank you for this info, very useful.
Originally Posted by onehundred80
(Post 832288)
What people forget is that parts like this were not made by Chrysler or Mercedes, they were made by a company that specializes in parts like this. So you try to get the part another way, the part has a number on it and the manufacturers name.
In this case the maker is Valeo and this problem has come up before, so using Valeo and turn signal in the Google search we get posts on the problem. I know that a Valeo part was found, if it actually worked in the end I cannot remember. I found this part (CLICK) but someone said it did not fit even though it was the same part number. Compare the photo to your part. https://www.crossfireforum.org/forum...cket-60_12.jpg |
Re: Front Indicator not working.
Originally Posted by boobles37
(Post 832152)
Just a quick update. Got the indicator working again by slightly bending up the contact on the housing where the bulb connects to. The contacts with in the headlight look burnt so not sure how long this fix will last as obviously something not right.
How did you get to the connectors inside the headlight assembly? I can't seem to be able to get a good look inside where the socket connects to the headlight assembly. Thank you. |
All times are GMT -4. The time now is 05:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands