Anyone done any rear light conversions
Re: Anyone done any rear light conversions
No i havnt but those twin recessed lights may well have been just Decals with cut outs for the actual lights?.
yep, and i would take a set of those in Black please .
but how ? i dont want to paint them , a pita and too permanent.
Crossfirestore ? or someone smart ,i/we need rear light decals with Cut outs Now!
But its probably like the aftermarket headlights situation ,no forward thinking.
yep, and i would take a set of those in Black please .
but how ? i dont want to paint them , a pita and too permanent.
Crossfirestore ? or someone smart ,i/we need rear light decals with Cut outs Now!
But its probably like the aftermarket headlights situation ,no forward thinking.
Re: Anyone done any rear light conversions
Look at the post by alexdc in this section, posted just two days ago. Nice picture of painted rear lights. Similar to what 8thwonder has done?
Re: Anyone done any rear light conversions
But I had to add a diode on the blinker wire so my brake light current doesn't travel back up to the dash cuz my dash signals would blink when I braked.
the diode prevents current going back to the dash. But let's current come from the relay/dash. Put one behind the bridge on both bulbs. So current can only go one way, from either source of power. (Signal relay or brake relay)
green wire is the bridge. Sharing source voltage in this case the relays. But the diode limit current from going back up. Only to the bulbs. And cuts off there
Last edited by Rsoe; 11-11-2017 at 06:53 PM.
The following users liked this post:
MAYAman (04-19-2022)