Crossfire aero kit, grill, double DIN kit updates.
The following users liked this post:
MAYAman (05-01-2024)
Re: Crossfire aero kit, grill, double DIN kit updates.
No modifications, you just pop out the buttons from the stock surround and into the new surround. The only modification you make is cutting the plastic cross brace for the single DIN radio. The strakes are ready now, the grill should be ready just printing another test print as I type this.
The following 3 users liked this post by MAYAman:
The following 3 users liked this post by MAYAman:
The following users liked this post:
MAYAman (05-21-2024)
Re: Crossfire aero kit, grill, double DIN kit updates.
I actually made two versions of the DoubleDin, the other kept the ash tray and the switches went to the console.
It is shown during filling the corners and is unpainted of course.
Last edited by onehundred80; 05-20-2024 at 10:30 PM.
The following 2 users liked this post by onehundred80:
M60A3Driver (05-21-2024),
MAYAman (05-21-2024)
Re: Crossfire aero kit, grill, double DIN kit updates.
Why not one piece? Because there is no resin printer under 30k dollars with a build plate that large. These are preliminary scans, I never said these were finished products. They are being sent to testers to test fit and feedback. I can see the seams on your build
I wouldn't be responsible for what anybody does with their car. These are installed at your prerogative/off road use only. Not for use with babies, puppies, ming vases, cartons of eggs or people made of glass.
I wouldn't be responsible for what anybody does with their car. These are installed at your prerogative/off road use only. Not for use with babies, puppies, ming vases, cartons of eggs or people made of glass.
Re: Crossfire aero kit, grill, double DIN kit updates.
Why not one piece? Because there is no resin printer under 30k dollars with a build plate that large. These are preliminary scans, I never said these were finished products. They are being sent to testers to test fit and feedback. I can see the seams on your build
I wouldn't be responsible for what anybody does with their car. These are installed at your prerogative/off road use only. Not for use with babies, puppies, ming vases, cartons of eggs or people made of glass.
I wouldn't be responsible for what anybody does with their car. These are installed at your prerogative/off road use only. Not for use with babies, puppies, ming vases, cartons of eggs or people made of glass.
I did finish the first one and painted them together, the first one is the one I am more happy with but I wanted the buttons on the dash.
I have all the original bezels, Nav radio etc so I could go back to stock.
Any mods I did can be taken back to OE specs, the NW Single air intake is on the shelf.
No original parts from my stock car were injured during the making of these faceplates.
This car is a 42,000 mile Garage Queen soon to be sold at the right price.
The following 2 users liked this post by onehundred80:
M60A3Driver (05-23-2024),
MAYAman (05-24-2024)
The following users liked this post:
MAYAman (05-30-2024)
Thread
Thread Starter
Forum
Replies
Last Post
ImportLabSRT
Parts/Accessories for sale - Archive
9
05-27-2010 08:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)