General This section is threads for discussion that is not related to the Crossfire or other cars. It can be about sports, movies etc. - But NO POLITICS please

I'm having trouble with N/W and Code3

Thread Tools
 
Old Mar 16, 2010 | 03:59 PM
  #1 (permalink)  
hcarter's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2009
Posts: 2,358
Likes: 6
From: Kingsport Tn.
Default I'm having trouble with N/W and Code3

I'm having trouble with my code3 and my Needswings Parts , their causing my rear tires to wear out
 
Reply
Old Mar 16, 2010 | 04:07 PM
  #2 (permalink)  
rcompart's Avatar
Senior Member
Joined: Apr 2008
Posts: 3,178
Likes: 23
From: Chicago, IL
Default Re: I'm having trouble with N/W and Code3

Originally Posted by hcarter
I'm having trouble with my code3 and my Needswings Parts , their causing my rear tires to wear out
AWESOME!!! Funny thing is before I clicked on the thread, I was thinking he can't be... Only problem he could be having is going through tires too quickly!
 
Reply
Old Mar 16, 2010 | 04:07 PM
  #3 (permalink)  
///SilverSaphRT6's Avatar
Senior Member
Joined: Mar 2009
Posts: 1,213
Likes: 1
From: Easley,South Carolina
Default Re: I'm having trouble with N/W and Code3

I need a Code 3 so if it's too much trouble for you...can I have it?
 
Reply
Old Mar 16, 2010 | 04:23 PM
  #4 (permalink)  
velociabstract's Avatar
Senior Member
Joined: Jul 2008
Posts: 4,525
Likes: 29
From: Puerto Rico
Default Re: I'm having trouble with N/W and Code3

I'm having trouble too. After installing my Needswings dual CAI and Code3 my times at the drag strip have gone from 13 to 15. I can't get traction. These parts should NOT be sold without a coupon for drag radials!

Les
 
Reply
Old Mar 16, 2010 | 04:51 PM
  #5 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,599
Likes: 34
From: IN
Default Re: I'm having trouble with N/W and Code3

Originally Posted by velociabstract
I'm having trouble too. After installing my Needswings dual CAI and Code3 my times at the drag strip have gone from 13 to 15. I can't get traction. These parts should NOT be sold without a coupon for drag radials!

Les
you guys are too funny....you need to feather the throttle just a tad there big boy.....
 
Reply
Old Mar 16, 2010 | 05:01 PM
  #6 (permalink)  
rcompart's Avatar
Senior Member
Joined: Apr 2008
Posts: 3,178
Likes: 23
From: Chicago, IL
Default Re: I'm having trouble with N/W and Code3

Originally Posted by oledoc2u
you guys are too funny....you need to feather the throttle just a tad there big boy.....
Wait, this car doesn't do that already?
 
Reply
Old Mar 16, 2010 | 05:05 PM
  #7 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,599
Likes: 34
From: IN
Default Re: I'm having trouble with N/W and Code3

Originally Posted by rcompart
Wait, this car doesn't do that already?
It does a lot to keep you straight Rudy, but it doesn't do that...lol
 
Reply
Old Mar 16, 2010 | 05:59 PM
  #8 (permalink)  
bmorgan's Avatar
Senior Member
Joined: Aug 2009
Posts: 3,459
Likes: 11
From: Warner Robins, GA
Default Re: I'm having trouble with N/W and Code3

Hey Howard, just put a set of Mickey Thompson ET Streets on the back at 18 PSI and you will be able to launch like a rocket without loosing any rear rubber.
 
Reply
Old Mar 17, 2010 | 02:36 PM
  #9 (permalink)  
hcarter's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2009
Posts: 2,358
Likes: 6
From: Kingsport Tn.
Default Re: I'm having trouble with N/W and Code3

Well I called my tire guy today to order two rear tires before the Dragon ,
Bob,,,, I'm not much of a drag racer I'm more into the twisties and earwax removing curves , But I can see where it could be habit forming
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mike OD
New Member Introductions
8
Sep 23, 2016 07:00 AM
RojoGTO
Cars For Sale - Archive
8
Feb 6, 2016 11:14 AM
FISHBONE
New Member Introductions
5
Sep 17, 2015 06:15 PM
Firebombbandit
TSBs and How-To Articles
9
Sep 3, 2015 06:42 PM
acCF2004
WTB - Items/Parts Wanted to Buy - Archive
5
Aug 25, 2015 08:35 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 03:13 PM.