I've seen so many people in videos with these gauges on the side panel, where are they purchased from and are they hard to hook up? they look awsome!!

 

I used to make them, but no longer do..... I dont want to get into it lol. Best bet it is buy a used set. It just so happens that gator has the set that was in my personal SRT for sale. The crack he took pictures of can not be seen when installed. I didn't even know it was there until I took it out to sell. Really good deal, probably going to be the last one available as far as pillars and gauges that say srt6 go. If you are looking for old style SRT6 emblems I am sure Rudy and or I can do some digging around and take care of that for you.

https://www.crossfireforum.org/forum...s-sensors.html

 

too late my friend...

 

ohh no doc did you pick them up.

 

yes I did....

 

Damn!!! how much did you pick them up for?

There not quite the ones I was looking for though, I recall seeing a video of member distantpulse racing his SRT, the difference was he had a digital section at the top of the 3 gauges dont know what it was for but looked really cool.

 

chris (distantpulse) has a digital AFR wideband on his. This is what you were seeing. The other two gauges in his are not digital readouts...

 

If you can find one of the JR Industries pillars, you can put any 2 1/16" (52mm) gauge you want in it. You will have to watch out for the length to make sure they would fit. Here is what mine look like.

 

Got mine from Summit. Universal dual gauge pod. A little trimming, heat from a heat gun and it fits pretty good. One screw is all that is holding it in place. Still have to do the roadster.

 

guys those look so good!

I'm jealous! does JR Industries still sell them?

are they hard to hook up? I wouldn't have a clue where to tap into for the boost pressure and the Air fuel ratios!

 

No more JR gauge pods...... You'll have to watch for someone selling theirs or find something like tighed1 used.

You cant tap into the Y pipe coming out of the SC and feed it to your boost gauge. For AFR I tapped into the signal from the ECU. You can get a gauge with a wideband/narrowband O2 sensor and take it off the exhaust also.

 

that looks pretty nice on there. do you have to turn your head sideways to read your gauges though?

 

I would not have to turn my head, because it is not on straight most of the time . Danny

 

I didn't realize that JR isn't doing the pillar pods anymore!! That sucks for the people that don't have one because they truely are a work of art. The fit is near perfect if not perfect. Mine is basically the same as Mike R's except that I have the AEM digital A/F and also chose the 06' style "SRT6" logo inside the gauges.

 

You know that your steering wheel is on the wrong side of your car right? Just kidding. Our pillars wouldn't have suited you very well because you have a RHD vehicle and our pillars were for LHD's.

 

Oh damn I didnt think of that!

I guess I could put them on my passanger side my fiance' could give me the readings haha!

 

Chris,

It does not look like you have your pod pushed in all the way, it looks like there is a gap in the top that should not be there...or is that just the photo making it look odd? It took me a few tries to get it just right with mine!

 

Yeah, in this pic there was a gap. I fixed this later after I saw it!! lol

 

I love the night shot. I wish JR was still doing these. Maybe we can see if we can talk him into doing it again if there is enough interest in doing another group purchase. I know I would be in.

 

How much was he charging for these? did he sell them with the gauges aswell?