CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   Interior (https://www.crossfireforum.org/forum/interior/)
-   -   Where to grab power on driver side fuse box (https://www.crossfireforum.org/forum/interior/51385-where-grab-power-driver-side-fuse-box.html)

Sheldon 07-27-2011 03:58 PM

Where to grab power on driver side fuse box
 
I looked at the fuses there and they all seem switched by the headlights, is there a fuse to pull from that has power when the car is on?

Or a better place inside the cabin to grab power?

ImportLabSRT 07-27-2011 04:07 PM

Re: Where to grab power on driver side fuse box
 

Originally Posted by Sheldon
I looked at the fuses there and they all seem switched by the headlights, is there a fuse to pull from that has power when the car is on?

Or a better place inside the cabin to grab power?

Under the hood, all the way in the back of the main fuse box on the drivers side, is a terminal that has switch B+. I use that for everything. To be on the safe side, I added a 20amp fuse right at the terminal (similar to the write up on here for i/c pump all the time).
~edit~ to get to that terminal you have to take the upper fuse box cover off. Just pull the 4 tabs away from the lower box and lift up.

joejones 07-28-2011 09:53 AM

Re: Where to grab power on driver side fuse box
 

Originally Posted by Sheldon
I looked at the fuses there and they all seem switched by the headlights, is there a fuse to pull from that has power when the car is on?

Or a better place inside the cabin to grab power?

Try #4. There is where I have my RD connected. It is switched.

NeedsWings 07-28-2011 09:58 AM

Re: Where to grab power on driver side fuse box
 
1 Attachment(s)
Rudy made up this image a while back...


All times are GMT -4. The time now is 09:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands