CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)

- Interior (https://www.crossfireforum.org/forum/interior/)

- - Remove front center console (https://www.crossfireforum.org/forum/interior/71779-remove-front-center-console.html)

Remove front center console

Hi Guys

I am working on my project and right now have an issue

I cant find how to remove my current center console (the part in the picture below) :confused:
I want to extract it out from my dashboard

https://farm9.staticflickr.com/8598/...1183dee3e7.jpg

I have already remove all the "aluminium" elements of the dash.

http://reho.st/medium/self/24f986972...c139743929.jpg

Thanks for any help !

Re: Remove front center console

Quote:

Originally Posted by massanu (Post 839767)

It looks as if you may be breaking new ground here. I have been where you're at several times but haven't removed that piece. Enlarge the photo you posted, see where the fasteners are and work back from there. You may have to remove most of the dash, so take pics as you go, you may do an invaluable service for others and contribute to the database on the forum.

Re: Remove front center console

hello Massanu,
I was looking for some guidance in removing the facia pieces from my crossfire and wanted to know how you do this. I hesistant to start pulling on things so as not to break them. I need to fix the ashtrayand thus remove that portion of the console . Did you figure out how to replace that piece you posted?

Re: Remove front center console

Quote:

Originally Posted by Sennaspirit (Post 901951)

If you have the paddle shifters it an easy task to remove the ashtray module.
You have to remove the center console to get at and remove the four screws that keep the front console tied to the floor. You can then spring the side walls of the console and remove the ashtray. I did it so I know it can be done. I think I pulled the left wall out, moved the left hand side of the ashtray into the console, rotated the ashtray anticlockwise a little and pulled the right side out.
If you do not have the paddles you can saw through the bridge piece as the screws hold it all together. Naturally the radio bezel is taken out first. Look at the paddle shifter install PDF for a look at the bridge and screws.
Remove the radio, remove the two screws at the top of the radio slot. The face plate is pried off, there are four clips on it two at the top left and right and two at the bottom left and right.
Center console removal. CLICK
Paddle shifters install. CLICK