Roadster Drivers Seat
 

Drivers seat forward and back switch does not work. Switch clicks once in forward switch position. Vertical and tilt motions work.
This seems to be a switch related problem. If so is the switch accessible without completely removing the seat?

Re: Roadster Drivers Seat
 

The best first step would be to download the manual.

You can locate it in 180’s signature

Re: Roadster Drivers Seat
 

You must remove the seat.

Re: Roadster Drivers Seat
 

Thanks Urban E but where do I find 180's signature?

Re: Roadster Drivers Seat
 

Same link is my signature

Re: Roadster Drivers Seat
 

Re: Roadster Drivers Seat
 

No u don't have to remove the seat but it makes it a lot easier,,, if it is your switch i have one it is in good shap no scratches but the front screw hole is broken but still works with a small washer . I want $75 + 20 shipping i am trying to load a picture

Re: Roadster Drivers Seat
 

both coupe and roadster are the same. you can remove those 3 screws and the handles and just swap the switches
https://cimg1.ibsrv.net/gimg/www.cro...b5f72ad02e.jpg
https://cimg4.ibsrv.net/gimg/www.cro...d1f0c632b3.jpg

Re: Roadster Drivers Seat
 

The switch assembly in the photo looks like a passenger side. Are the switches for both sides interchangeable? As I have indicated the vertical and reclining switches both operate.
If the seat is not removed is removing the side panel with the switches difficult to take out?
Thanks,
Jack

Re: Roadster Drivers Seat
 

sorry about that u r right it is the pass side I have this .driver's side that i removed the sw were working when i took it out send me say 8 to 10 shipping ans i will send it to u . I had switched my seats left to right (gave me a new seat on the drivers side) https://www.crossfireforum.org/forum...ght=swap+seats then i got a new seat pass side from a roadster put it in the dr side of my V8 coupe sent u a pm
https://cimg1.ibsrv.net/gimg/www.cro...70c31bf8ad.jpg