$65 Checker Auto Salvage USA-OK(Lawton) 1-800-838-8697 more on car-part dot com & Ebay

 

Thank you for those pages. I used to always just use eBay but it will help to have some salvage yard databases to look through also. I found one on eBay yesterday right around the corner from me but a little more than what's available through Checker Auto Salvage and car-part dot com.
Been trying to see if he wants to come down in price and it not, at least it's not far away and I can pick it up myself plus take a good look - it's hard to see if the seal/lens is in good shape. Of course I could also sand/polish if cloudy but I'd rather not if I already pay a little more.
Thanks very much for those links, checking out two other ones from the website in Florida right now.
​​​​​

 

You're welcomed , be aware the fog light lenses are glass, probably made that way due being prone to damage that close to the road. The link I sent is car-part.com but it usually won't let me post it in that format

 

Yep that's the one I used. Great resource for the future. I am going to look at a Fog light nearby tomorrow and thanks for the tip with glass. That's interesting. Always wondered why they are less prone to hazing in the sun compared to our headlights.

​​​​​

 

You can have your headlight lenses restored. A lot of Walmart's with a auto center do headlight restoration $30 for both lights or the link below

https://www.google.com/search?q=head...hrome&ie=UTF-8

 

Got one off eBay. Installed today. Looks very clear. Floridian sun might do a number on it over time but eventually I will take my car to Sam's Club. Took my NA Coupe there, $34.99 to wet sand, polish and apply clear coat with UV filter. And that's for all 4 lights w/4 year warranty. Can't beat it.

But it's too early, lights are still really really nice!

​

 

You could apply a UV protection coating to them before any damage occurs.

 

Great tip. I actually replace my front and rear Chrysler emblem. Drilled it out of the wing and glued in a new one. But before doing so I applied three coats of UV protective coating so they won't fade again.

Might to tape off the area of the lights and apply, too.


​​​​​