Needed: right wheelwell access panel/door

Thread Tools

Search this Thread

Apr 4, 2010 | 07:17 PM

#1 (permalink)

70GT6

Thread Starter

Senior Member

Joined: Mar 2008

Posts: 1,422

Likes: 4

From: IL

Needed: right wheelwell access panel/door

While under the car today I noticed the rigth side wheelwell foglight access pane was gone.

I believe it is part # 05098682AA

Anyone have an extra sitting on around? Let me know what you want for it.
Thanks!

Apr 4, 2010 | 08:45 PM

#2 (permalink)

oledoc2u

Senior Member

Joined: Mar 2008

Posts: 14,599

Likes: 34

From: IN

Re: Needed: right wheelwell access panel/door

Quote:

Originally Posted by 70GT6

Contact sowardcustoms......he can get them for you....not that expensive

Apr 5, 2010 | 07:21 PM

#3 (permalink)

PA/XFIRE

Forum Regular

Joined: Sep 2007

Posts: 436

Likes: 0

Re: Needed: right wheelwell access panel/door

Quote:

Originally Posted by 70GT6

I bought one at a local chrysler dealer for $ 7.50 good luck with it. ILLCYA

Apr 5, 2010 | 07:30 PM

#4 (permalink)

70GT6

Thread Starter

Senior Member

Joined: Mar 2008

Posts: 1,422

Likes: 4

From: IL

Re: Needed: right wheelwell access panel/door

Was not worried about the cost - more about how long it takes to get - I will check it out maybe these are readily available.

Apr 8, 2010 | 12:09 PM

#5 (permalink)

Montana Crossfire

Senior Member

- Forum Super Sponsor -

Joined: Oct 2007

Posts: 1,271

Likes: 1

From: Great Falls, Montana ( Big Sky Country)

Re: Needed: right wheelwell access panel/door

Actually I had to order one from Chrysler and it was really quick, as quick as pretty much regular shipping and it was a surprise at under 20 bucks...
Mike

Apr 8, 2010 | 08:15 PM

#6 (permalink)

Squirrel Crusher

Senior Member

Joined: Oct 2007

Posts: 1,530

Likes: 7

From: Charlotte,NC

Re: Needed: right wheelwell access panel/door

These access pannels must blow off easily or maybe it's from running thru slightly flooded streets. I've replaced mine also. Squirrel Crusher

Apr 8, 2010 | 08:18 PM

#7 (permalink)

70GT6

Thread Starter

Senior Member

Joined: Mar 2008

Posts: 1,422

Likes: 4

From: IL

Re: Needed: right wheelwell access panel/door

Quote:

Originally Posted by Squirrel Crusher

These access pannels must blow off easily or maybe it's from running thru slightly flooded streets. I've replaced mine also. Squirrel Crusher

Must be easy.....mine is dry weather only

Apr 9, 2010 | 06:47 PM

#8 (permalink)

SNAKEWOLF

Joined: May 2008

Posts: 234

Likes: 0

Re: Needed: right wheelwell access panel/door

If You Are In Wet Roads Then Consider Using A Small Thin Piece Of Stainless On Each Side With Small Push In Or Screw You Will Not Loose Again

Otis

Jun 26, 2013 | 04:17 PM

#9 (permalink)

LVXF

Joined: Nov 2007

Posts: 110

Likes: 0

From: Las Vegas, NV

Re: Needed: right wheelwell access panel/door

Available at local MB dealer. Part #170-884-01-22 for Driver; 170-884-02-22 for Passenger. $22.79 each. I'm putting a couple of pieces of Gorilla tape over mine.