WTB Inside door pull handles
Hey Everyone,
I've searched everywhere in the forums and on online parts stores and cannot for the life of me find the complete inside pull handles for this car. I have an 04 Crossfire. I need the front cover part and also the back part(the part that bolts into the door itself). I am restoring a Crossfire i just bought and this is the hardest part yet i have to find. Let me know asking prices and everything. Thanks. |
Re: WTB Inside door pull handles
Originally Posted by Chrysler_xfire
Hey Everyone,
I've searched everywhere in the forums and on online parts stores and cannot for the life of me find the complete inside pull handles for this car. I have an 04 Crossfire. I need the front cover part and also the back part(the part that bolts into the door itself). I am restoring a Crossfire i just bought and this is the hardest part yet i have to find. Let me know asking prices and everything. Thanks. |
Re: WTB Inside door pull handles
Originally Posted by frankeyser
The back of the handle seems to be made on the door panel. I have an extra door stored up in the garage. I will see how it attaches. But from what I remember it did not look like a part that would come off easily.
You use the hammer at your own risk though.;) The posts of the handle are the silver tapered items in the middle of the door. https://www.crossfireforum.org/galle...DSC_110064.JPG |
Re: WTB Inside door pull handles
Originally Posted by Chrysler_xfire
Hey Everyone,
I've searched everywhere in the forums and on online parts stores and cannot for the life of me find the complete inside pull handles for this car. I have an 04 Crossfire. I need the front cover part and also the back part(the part that bolts into the door itself). I am restoring a Crossfire i just bought and this is the hardest part yet i have to find. Let me know asking prices and everything. Thanks. $35 shipped for both front covers if you're interested. |
Re: WTB Inside door pull handles
If you broke the back part of the door pull the easiest thing to do might be to repair it. Otherwise you may need to buy a door panel to find the part you need. Assuming your door pull is broken remove the two screws that go into the door panel and door through the door pull. Spin those broken pieces around in the door panel until they come out (this will take a while but it's easier than removing the door panel). Once you got those out epoxy them to the back of the door pull, consider adding a strap to either side to provide strength the whole piece. Reinstall and you should be ok.
|
Re: WTB Inside door pull handles
Hey guys, thanks for all the feedback. The biggest problem i have is i just bought the car and all the damage that has been done was done by (in my personal opinion of the old owner) by a teenage brat who didnt care for her stuff. Luckily she got all the maintenance done at dealers so i know the oil changes were done and everything, but i digress.
Anyways so she threw away the door pull that broke off and thats my problem. If they were still around i would work something up because thats what i do, but i dont have them so it its a bit harder haha. I did pull the remnants of the handle out and it seems i could swap a new one in but the problem with that is i dont know where to find a new one. So any ideas where to go from there? Any tips would be great. Because the worst part is when i have passengers like my girlfriend or friends ride, they seem to grab parts of the door that are also unstable and it makes me worry other things will break. Also, I can do 35 for both the covers because i need them as well, but i wanted to wait and see if i can even get a hold of the actual pulls themselves because otherwise the covers are kind of pointless for me until then. Thanks once again for all of the tips and info. |
Re: WTB Inside door pull handles
Originally Posted by Chrysler_xfire
Hey guys, thanks for all the feedback. The biggest problem i have is i just bought the car and all the damage that has been done was done by (in my personal opinion of the old owner) by a teenage brat who didnt care for her stuff. Luckily she got all the maintenance done at dealers so i know the oil changes were done and everything, but i digress.
Anyways so she threw away the door pull that broke off and thats my problem. If they were still around i would work something up because thats what i do, but i dont have them so it its a bit harder haha. I did pull the remnants of the handle out and it seems i could swap a new one in but the problem with that is i dont know where to find a new one. So any ideas where to go from there? Any tips would be great. Because the worst part is when i have passengers like my girlfriend or friends ride, they seem to grab parts of the door that are also unstable and it makes me worry other things will break. Also, I can do 35 for both the covers because i need them as well, but i wanted to wait and see if i can even get a hold of the actual pulls themselves because otherwise the covers are kind of pointless for me until then. Thanks once again for all of the tips and info. No worries on the door pulls, they're here if you need them. I agree they're quite useless without the functioning handle behind them LOL |
Re: WTB Inside door pull handles
Originally Posted by Chrysler_xfire
Hey guys, thanks for all the feedback. The biggest problem i have is i just bought the car and all the damage that has been done was done by (in my personal opinion of the old owner) by a teenage brat who didnt care for her stuff. Luckily she got all the maintenance done at dealers so i know the oil changes were done and everything, but i digress.
Anyways so she threw away the door pull that broke off and thats my problem. If they were still around i would work something up because thats what i do, but i dont have them so it its a bit harder haha. I did pull the remnants of the handle out and it seems i could swap a new one in but the problem with that is i dont know where to find a new one. So any ideas where to go from there? Any tips would be great. Because the worst part is when i have passengers like my girlfriend or friends ride, they seem to grab parts of the door that are also unstable and it makes me worry other things will break. Also, I can do 35 for both the covers because i need them as well, but i wanted to wait and see if i can even get a hold of the actual pulls themselves because otherwise the covers are kind of pointless for me until then. Thanks once again for all of the tips and info. I recently bought a Crossfire 04 and it was missing the drivers door pull handle. Did you ever find a replacement? Thanks |
Re: WTB Inside door pull handles
Originally Posted by Frinemy
Hello Chrysler_xfire,
I recently bought a Crossfire 04 and it was missing the drivers door pull handle. Did you ever find a replacement? Thanks I did not find a replacement. There are complete door panels on ebay and in junkyards but everyone wants $300 + for them and i just cannot justify that amount of money. However i am working on creating my own door pulls(my brother has a machine shop so i was thinking about designing them and then having him cut/build them). If you are willing to spend the money the best thing to do is just buy a new door panel. Once i come up with a design for the pull handles i will post info on how that goes and if it works out i can make them available to others on here. Anyways sorry i cant help out much. Seems the parts we need are far and few between. Good luck with the new crossfire though. |
Re: WTB Inside door pull handles
I found the inside pull handles @ parts.com. It's just the handle. The right side is $33.58, left side (the one I need) is $63.25.
Thank you for your help. |
Re: WTB Inside door pull handles
Originally Posted by Frinemy
(Post 668486)
I found the inside pull handles @ parts.com. It's just the handle. The right side is $33.58, left side (the one I need) is $63.25
I know for years, the Chrysler catalog was bass-ackwards because they referred to the outer covers (non-structural, simply cosmetic) as the pull handle. |
Re: WTB Inside door pull handles
Originally Posted by JHM2K
(Post 668520)
Post pics when you receive them, as well as the part number. This could be very helpful if it proves to be the "inner" portion that actually secures to the door.
I know for years, the Chrysler catalog was bass-ackwards because they referred to the outer covers (non-structural, simply cosmetic) as the pull handle. There are parts listed as Cover, Pull Handle Right - 68003474AA Left - 68003475AA and Pull,Door Interior, Strap. Right - 0YA04401AA Left - 0YA05401AA The price difference reflects the different parts not left and right. I'll check but someone, maybe two people, got caught buying the outer when they wanted the inner. Be careful. |
Re: WTB Inside door pull handles
Originally Posted by Frinemy
(Post 668486)
I found the inside pull handles @ parts.com. It's just the handle. The right side is $33.58, left side (the one I need) is $63.25.
Thank you for your help. |
Re: WTB Inside door pull handles
Originally Posted by onehundred80
(Post 668534)
From the Parts Catalog.
There are parts listed as Cover, Pull Handle Right - 68003474AA Left - 68003475AA and Pull,Door Interior, Strap. Right - 0YA04401AA Left - 0YA05401AA The price difference reflects the different parts not left and right. I'll check but someone, maybe two people, got caught buying the outer when they wanted the inner. Be careful. |
Re: WTB Inside door pull handles
Originally Posted by lildaddym
(Post 668537)
Why the heck is one side more expensive than the other?!
The expensive part I am sure is the correct part you need but is it the left door or the right door part? When you order ask specifically for the left door inner pull. That way you can send it back if they screw up. |
Re: WTB Inside door pull handles
Originally Posted by frankeyser
(Post 668545)
The OEM ones are glued in corrected? I am trying to remember what the looked like. Do these replacments bolt in?
|
Originally Posted by lildaddym
(Post 668537)
Why the heck is one side more expensive than the other?!
|
Re: WTB Inside door pull handles
Originally Posted by blkXfire04
(Post 764054)
Did you ever buy interior door pulls? If so did you get a good deal and where? Do you know if the right one will fit on the left since it is so much cheaper
|
All times are GMT -4. The time now is 01:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands