2004 Chrysler Crossfire Coupe for parts. Car was involved in a light rear end accident. I used front end sheet metal to repair my SRT6. Car has 68k miles. Engine, tranny, and rear end are in good shape. Many parts available. Reply if interested.

Thanks, Mark (Three, two, one-795-2426)

Engine ......................$1000
Transmission............$ 500
Rear End...................$ 150
Rims...........................$ 300 with two nearly new front tires
Seats, leather............$ 150
Door, ds.................... $ 200
Door, ps.................... $ 50 with light sheet metal damage
Door panels...............$ 100 each
Rocker panel covers.$ 100 pair
Mirror, ps door..........$ 100
Oil filter housing........$ 50 for SRT6
Oil cooler...................$ 100 for SRT6
Water pump...............$ 50 new, bought for SRT6, but it didn't fit
Oil filter housing, SRT6..$40
Oil cooler, SRT6..........$100

 

I am looking for the fasteners that hold the interior panels in the trunk area together. Many of mine have broken when an inept mechanic took the panel out to access the equipment underneath. Thanks!

 

Is it a coupe? If yes I am interested int the spoiler. Not the mechanism, just the actual lid.

 

How much for all 4 calipers ?

 

[QUOTE=ala_xfire;7665[HTML][/HTML]83]How much for all 4 calipers ?[/QUOT
How does $25 per caliper sound? Plus shipping.

Let me know. Mark

 

I'll give it a look. The trunk was a little damaged. If there are any good fasteners I'll save them for you. I have out of town guests arriving on Thursday so I may not be able to get to it until late next week.

Thanks, Mark

 

It is a Coupe, but not an SRT6. I am hoping to sell the rear hatch lid as a whole part, but if it doesn't sell, I'll get in touch with you about the spoiler lid.

Thanks, Mark

If you really need it now, make an offer and I'll consider it.

 

Not bad, but a yard about 35 miles north of me has 2 complete sets, they are asking $20 per......
Considering the shipping, I'll have to say no thanks .....

 

Sounds like the salvage yard has a good price. I could reduce my price, but the shipping would make it a bad deal again.

Good luck and thanks. Mark

 

Search my posts. I found these and replaced mine several months ago...

 

Do you have these with the tabs in good shape?

https://www.crossfireforum.org/forum...belt-trim.html

 

No idea. I'll check and get back with you. I'm short of time right now so it might take me several days. If I don't respond, email me (mrogers22@cfl.rr.com)

Thanks, Mark

 

Text sent. Do you receive texts?

 

I need (1) rear wheel if you have one in decent shape (I don't need the tire). Email me at: borslohcin@gmail.com

 

How about a fog light access panel, Silver dash panel around the cigar lighter, shipped to 75165?
Thanks!

 

Thanks! These fasteners have been hard to find.

 

Do you have the top windshield molding. Safelite snapped off all the clips when replacing my windshield.

 

I'm assuming that you are talking about the plastic trim piece mounted behind the seats that cover the seat belt mechanism. The seat belt slides through an access slot. If so, both the top pieces are cracked and or have a broken off corner. They are presentable from main view, but towards the rear is the cracked part. One of the bezels has broken off tabs, the other is fine. Both bezels look good when installed.

Email me if you want pictures (mrogers22@cfl.rr.com). I'm a little pressed for time since I have out of town guests arriving today through mid next week.

Thanks, Mark

 

I do have a top windshield molding. Aren't the clips adhered on with double back tape? Email me if you are still interested (mrogers22@cfl.rr.com) and I'll send pictures. Make an offer on the molding.

Thanks, Mark

 

I don't have access panels behind fog lights. I did just pull the entire cigarette lighter dash trim. Email me and I'll send pictures.

Thanks, Mark