For HDDP... SRT6 ECU/PCM Sticker and IC Plumbing
Join Date: Jun 2006
Location: San Mateo, CA, USA, Earth, Sol, Milkyway
Age: 55
Posts: 1,943
Likes: 0
Received 17 Likes
on
11 Posts
For HDDP... SRT6 ECU/PCM Sticker and IC Plumbing
HDDP,
Here you go buddy... I'll start with the ECU/PCM Sticker from my SRT6. I'm sure there's a part number in there somewhere...
I was actually able to get the ECU/PCM out without disconnecting anything.
First two pictures of intercooler plumbing attached... more to follow.
Here you go buddy... I'll start with the ECU/PCM Sticker from my SRT6. I'm sure there's a part number in there somewhere...
I was actually able to get the ECU/PCM out without disconnecting anything.
First two pictures of intercooler plumbing attached... more to follow.
Join Date: Jun 2006
Location: San Mateo, CA, USA, Earth, Sol, Milkyway
Age: 55
Posts: 1,943
Likes: 0
Received 17 Likes
on
11 Posts
Re: For HDDP... SRT6 ECU/PCM Sticker and IC Plumbing
More intercooler plumbing pictures attached... sorry, not in any particular order.
NOTE: I'm not sure about the line coming from the firewall to the back of the engine... brake booster? I figured I'd include that along with the air pump plumbing.
Now I KNOW I need to get the car steam cleaned (underside and engine bay).
NOTE: I'm not sure about the line coming from the firewall to the back of the engine... brake booster? I figured I'd include that along with the air pump plumbing.
Now I KNOW I need to get the car steam cleaned (underside and engine bay).
Re: For HDDP... SRT6 ECU/PCM Sticker and IC Plumbing
Thanks Buddy... I'll fire off that part number to my Bosch guy and see what he comes-up with... He still hasn't gotten the specs on the injectors yet... It's time for payback from those steaks. 
The shots of the plumbing will help when I start the engine swap, thanks...
The shots of the plumbing will help when I start the engine swap, thanks...
Re: For HDDP... SRT6 ECU/PCM Sticker and IC Plumbing
Does the intercooler plumbing run through the main radiator or the separate radiator in front of the main ? On the NA car the front radiator is used by the AC system... Also, there is a round black device on the driver side mounted to the forward side of the wheel well, is this a circ pump for the IC ?
Re: For HDDP... SRT6 ECU/PCM Sticker and IC Plumbing
This is part of the HVAC system, so I'm thinking the IC shares the front AC radiator...
https://www.crossfireforum.org/forum...1&d=1188070542
https://www.crossfireforum.org/forum...4&d=1188070698
https://www.crossfireforum.org/forum...1&d=1188070542
https://www.crossfireforum.org/forum...4&d=1188070698
Forum Regular
Join Date: Nov 2004
Age: 43
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
Join Date: Jun 2006
Location: San Mateo, CA, USA, Earth, Sol, Milkyway
Age: 55
Posts: 1,943
Likes: 0
Received 17 Likes
on
11 Posts
Re: For HDDP... SRT6 ECU/PCM Sticker and IC Plumbing
Yes, I believe (although I haven't seen it yet) a separate heat exchanger under the front lower grill. Since you don't have Air Conditioning anymore... I'd use the space taken normally by the condenser to mount a monster intercooler heat exchanger (like you see on the Mitsubishi Evos).
Looked like a small separate pump to me, but it also looks like it's hooked into the coolant overflow reservoir too... I'd have to do some more digging.
Cheers!
Looked like a small separate pump to me, but it also looks like it's hooked into the coolant overflow reservoir too... I'd have to do some more digging.
Cheers!
Thread
Thread Starter
Forum
Replies
Last Post
rogerlemoine
WTB - Items/Parts Wanted to Buy - Archive
3
10-26-2015 12:02 AM
Power Sedan
Parts/Accessories for sale - Archive
6
09-20-2015 09:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)