WELL I FOUND THE SUPERCHIP AT A STORE HERE IN UT, THE PEOPLE THERE ARE LOOKING TO SEE IF IT WORKS WITH OUR Crossfires.

I GOT A DYNO ON A 300C (even though I'm talking about the Crossfire) AND IT GAVE IT 13 HP AND 14.7 TORQUE.
(http://www.superchips.com/~superchip...kepdf-1236.pdf).

THE PRICE ON THE INTERNET IS OVER $500 BUT I CAN GET IT FOR $350 IN PERSON. SO LOOK AT THE PRODUCT DESCRIPTION IT SEEMS THAT ITS A GREAT BANG FOR THE BUCK SINCE THE ULTIMATE CHIPS ARE $450. THIS CAN SOLVE THE SHIFTING PROBLEMS MUCH TALKED ABOUT RECENTLY!

SUPERCHIP http://www.superchips.com/product.ph...k=1236&msg=%2B
HOW IT WORKS http://www.superchips.com/products.phtml?cat=21
LETS TALK ABOUT IT SOON.

 

Suggest this thread is moved to "OTHER CARS" ... not many of us own a 300C on this forum...

 

capslock.gif

 

That's a good one! ROFLMAO (or roflmao).

 

the first time i saw it i was ROFL too... couldn't pass up the opportunity.

 

bollox- Yeah! I'm talking about the CROSSFIRE! If you read the post carefully you would have noticed that I'm in the process of researching this part out for "our cars". So that as of right now, the only chrysler I got a dyno for is a 300c.

 

Read it again smart "A"!!!

 

former NXMX5 - Thanks for wasting precious space, and you're welcome for the info on the part I tried to share with the others!

 

You will not get 20% increase in HP from Superchips.

 

link no workie. what motor is that for? because if its a hemi, its not 20%. and if its the v6 its still not 20%. 20% for our cars would equal about 43 hp.

 

7-10% max hp gain on this engine with an off-the-shelf chip upgrade. If you want a 20% chip, you're going to have to start with a custom set-up, if you can find one... It's not that easy, you'll have to dink with the fuel air ratio as well, and then start tricking the 02 sensors so they don't lean out the mixture.