Anyone know if these will work on ours...

Schatz Lowering Springs for SLK230 and SLK320 #1702020
Lowers your SLK between 30mm-35mm (1.1" - 1.3") front and rear for improved handling and a great look High Quality. Made in Germany.

$229.99 for all 4.

 

the slk 320 springs will work on the crossfire... this is what i had on my car (but eibach)...

they will be a tad lower than the crossfire designated lowering springs.

 

Thanks Andrew.
I figure I wasn't able to sell it while I was away the past 2 yrs so I guess Il'l keep it and start doing some mods...

BTW I'll be back for good in feb, still need those emblems... Thanks.

 

save yourself about $300 and cut out 1 or 3/4 of a coil, has the same effect. https://www.crossfireforum.org/forum...ad.php?t=18650

and another good write up by Bazzle on benzworld http://www.benzworld.org/forums/r170...val-front.html

this tool makes life easier, you might want to rent it from the dealer.

 

Hmm ? I was always told that cutting or heating springs create long term damage to the springs ?

Anyone has cut theirs here ?

How about the shocks ? Any shocks in particular, somehting tells me those would have to be change as I change the springs...

Good thought, spring compressor...

 

you never heat springs, that's a total amatuer move. cutting is OK,

As for shocks I would use an adjustable sport shock.