Modded engine cover to show plaque, now w/ pic's
Well I've been wanting to do this ever since I put the engine plaque on the supercharger plus when someone wanted to see the supercharger I'd have to pop the engine cover off. Now that I done it I really don't know if I like it, it will probably look a little better when I put something in those two big threaded hole's in the supercharger. GRRR, pic's won't load !!! Tried again this morning (11-27-07) and they still won't load.
|
Re: Modded engine cover to show plaque
Anybody else having trouble loading picture's? I checked the size of the jpg. They were not too big, but I sized them down and tried again and still no luck.
|
Re: Modded engine cover to show plaque
Originally Posted by Steve Hellums
Anybody else having trouble loading picture's? I checked the size of the jpg. They were not too big, but I sized them down and tried again and still no luck.
|
Re: Modded engine cover to show plaque
Set an account at photobucket.com it's free and you can use the direct link to add photos to your post.
|
Re: Modded engine cover to show plaque
2 Attachment(s)
Originally Posted by Steve Hellums
Well I've been wanting to do this ever since I put the engine plaque on the supercharger plus when someone wanted to see the supercharger I'd have to pop the engine cover off. Now that I done it I really don't know if I like it, it will probably look a little better when I put something in those two big threaded hole's in the supercharger. GRRR, pic's won't load !!!
Attachment 50878 Attachment 50879 |
Re: Modded engine cover to show plaque
Humm, looks like nobody was able to load a pic on this thread, a least all I see are red X's. Does anybody else see just red X's on this thread or is it just me?
|
Re: Modded engine cover to show plaque
Originally Posted by maxxm
I had the same problem yesterday. I resized the photos from over 1Mb to less than 200 Kb, and that worked for uploading them. Good luck; I want to see your pix! ;)
|
Re: Modded engine cover to show plaque
Originally Posted by marauderroy
Set an account at photobucket.com it's free and you can use the direct link to add photos to your post.
|
Re: Modded engine cover to show plaque
Originally Posted by Steve Hellums
I tried to load the Photobucket.com page, but my computer here at work will not allow me access to that site. I had some other pic's I wanted to post of opening up the intake tube's, so I tried it in the SRT6 section and they wouldn't load either. My computer at home is still down with a viris that my daughter down loaded for her Myspace page so I can't do it for there either.
|
Re: Modded engine cover to show plaque
Originally Posted by simon-srt6
I used Photobucket and I can see them on the forum...maybe it is a firewall issue you have ?
|
Re: Modded engine cover to show plaque
Originally Posted by Steve Hellums
Yeah, I figured that. We have some monster firewalls here where I work and I'm really not suppost to be on a site like this one, there's a lot of site's I can not access. One of these day's they'll probably fix it where I won't be able to get on the board here. I looked in the Troubleshooting & Suggestions part of the fourm and it looks like I'm not the only one having these issue's.
Sux... gotta love Big Brother. |
Re: Modded engine cover to show plaque
Originally Posted by JHM2K
That's most-likely the problem. Here at Nissan, we're blocked from viewing a lot of stuff as well. Anything linked to a site that is blocked is unable to be seen, i.e. pictures, vids, etc.
Sux... gotta love Big Brother. |
Re: Modded engine cover to show plaque
True... anytime we directly visit the site, it comes up with the warning memo. I was referencing the linked material, such as embedded pics.
I've noticed some site-gremlins on here myself the past few days though, so who knows... |
Re: Modded engine cover to show plaque
Originally Posted by JHM2K
True... anytime we directly visit the site, it comes up with the warning memo. I was referencing the linked material, such as embedded pics.
I've noticed some site-gremlins on here myself the past few days though, so who knows... I wonder what the total limit is on stored attachments, maybe I've reached my limits. :confused: On attachments in the user control panel I got this - Attachment StatisticsYou are currently using 28.04 MB to store 77 uploaded attachments. Anybody know what the limit is? |
Re: Modded engine cover to show plaque
I hate to bring up an old thread, but I finally hooked up with a hosting site since I can't upload pic's as a jepeg or anything else. I had these pic's and figured I'd go ahead and post them. I did figure out something to fill in the S/C holes that were exposed, I done a little work on some chrome lug bolts just to fill them in until I find something better.
http://img257.imageshack.us/img257/1...0218uk6.th.jpghttp://img513.imageshack.us/img513/5...0217dm8.th.jpghttp://img243.imageshack.us/img243/5...0215pg8.th.jpg |
Re: Modded engine cover to show plaque
Originally Posted by Steve Hellums
I hate to bring up an old thread, but I finally hooked up with a hosting site since I can't upload pic's as a jepeg or anything else. I had these pic's and figured I'd go ahead and post them. I did figure out something to fill in the S/C holes that were exposed, I done a little work on some chrome lug bolts just to fill them in until I find something better.
http://img257.imageshack.us/img257/1...0218uk6.th.jpghttp://img513.imageshack.us/img513/5...0217dm8.th.jpghttp://img243.imageshack.us/img243/5...0215pg8.th.jpg |
All times are GMT -4. The time now is 07:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands