speed innovations, or inmotion, upsolute
basically this is what im coming up with so some help please deciding, i want the best one which has the best gains and i haven't been able to find all prices yet, some are listed but others are not
where should i look into ordering this what website or phone number, what are the gains, i just have cat back and cold air intake done now.
so you definetly feel a gain with it, does the car really feel faster and more responsive, i assume no dyno facts, also your car looks good what did you go with when you lowered it, i have 20x10's on the back and 19x8.5's on the front i don't know what to go with so i don't rub.
Originally Posted by tylerxfire
so you definetly feel a gain with it, does the car really feel faster and more responsive, i assume no dyno facts, also your car looks good what did you go with when you lowered it, i have 20x10's on the back and 19x8.5's on the front i don't know what to go with so i don't rub.
Yes I definitely felt a good gain, I have an auto and the downshift at 40mph breaks my tires loose and it never did that before. The drop: I cut one full coil of each spring it rides a little rougher but the cornering is an amazing difference, body roll is almost non existent. The only rub problem I have is when I turn really sharp backing out it get a little rub but it does not do it going forward (I don't know how that all works) I wanted to get 20s but I don't know now I might just go with 19s all around.
A few more pics:


Last edited by tjames.bell@gmail.com; Feb 1, 2008 at 07:36 PM.
smoked the tails huh, im thinking about it, now that i have the black rims with big chrome lip, and on a black on black roadster, where did you go through for the taillight tints and how was the fit, also where did you get the stripes under the doors i have seen that before somewhere.
Originally Posted by tylerxfire
smoked the tails huh, im thinking about it, now that i have the black rims with big chrome lip, and on a black on black roadster, where did you go through for the taillight tints and how was the fit, also where did you get the stripes under the doors i have seen that before somewhere.
The tints are smoked 3m with no adhesive got them off of eBay headlights and tail lights were like $20 they were a little small but they stretch really good. Taking them off and putting them back on is really easy as well, just a spray bottle with watter and a little alcohol & a squeegee about 5 mins all around. The stripes are vinyl that I got from a local vinyl shop, also there's a thick one across the back window.
Here is what the back window looks like:
Last edited by tjames.bell@gmail.com; Feb 1, 2008 at 09:54 PM.
nice man, i have 10% tint on my roadster looks hot, but i like those stripes under ther door i might look into that, wonder if i can get them chrome might be a nice little touch to my chrome lip. i am purchasing my inmotion chip tomorrow, wonder how romoving my ecu will be
Originally Posted by tylerxfire
nice man, i have 10% tint on my roadster looks hot, but i like those stripes under ther door i might look into that, wonder if i can get them chrome might be a nice little touch to my chrome lip. i am purchasing my inmotion chip tomorrow, wonder how romoving my ecu will be
nice thanks for your info, where exactly should i start looking for the ecu when i go to pull it i havent even looked yet being that the car is covered up the garage where its been for months cause the new york shitty weather
Originally Posted by tjames.bell@gmail.com
Yes I definitely felt a good gain, I have an auto and the downshift at 40mph breaks my tires loose and it never did that before. The drop: I cut one full coil of each spring it rides a little rougher but the cornering is an amazing difference, body roll is almost non existent. The only rub problem I have is when I turn really sharp backing out it get a little rub but it does not do it going forward (I don't know how that all works) I wanted to get 20s but I don't know now I might just go with 19s all around.
A few more pics:



A few more pics:



The car looks damn good! Just enough to close the gap between the tire and the wheel well. Did you change the shocks to compensate for the drop?
Originally Posted by tylerxfire
nice thanks for your info, where exactly should i start looking for the ecu when i go to pull it i havent even looked yet being that the car is covered up the garage where its been for months cause the new york shitty weather
Originally Posted by downwardspiral
The car looks damn good! Just enough to close the gap between the tire and the wheel well. Did you change the shocks to compensate for the drop?
thanks i will go uncover it and take a look tomorrow, ill lwt ya know how i turn out, hope i enjoy the inmotion others are saying to go with powerchip but think im gonna go with inmotion
Originally Posted by tylerxfire
thanks i will go uncover it and take a look tomorrow, ill lwt ya know how i turn out, hope i enjoy the inmotion others are saying to go with powerchip but think im gonna go with inmotion
I cant say that it is better than the powerchip because I have not had it to compare. I will say you will not be disappointed, money well spent in my book.
Go with InMotion, they were great to work with. If you don't want to mess with sending off the ECU, give them a deposit, they send you the tool to hook up your laptop, read the ecu, email them the file, they send you back the "tuning" file in a few hours, and you write it to the ecu (takes just a few minutes). That's how I did mine, and the difference was even noticeable to my girlfriend from the passenger's seat. I also use some 100 octane unleaded racing fuel 50/50 with the crappy premium here in Phoenix, and really tell the difference.
Just did a track day at PIR with a guy who used to own an Xfire, and he couldn't believe the difference (MB V8 instake with K&N's, InMotion chip, and Magnaflow exhaust).
Just did a track day at PIR with a guy who used to own an Xfire, and he couldn't believe the difference (MB V8 instake with K&N's, InMotion chip, and Magnaflow exhaust).
How much was the rental of the tool? Was there a deposit? I think a couple guys here in Central Texas mght be interested in doing this type of tuning.
You'll have to talk to James at InMotion --- I did several cars (not just crossfires), so the deposit was basically what it cost for the software.........
Hmmm... would anybody in North Carolina be interested in this with Inmotion, and get the tool.?I know there's a couple of people around the Greensboro area.



