Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Vortec

Thread Tools
 
Old Apr 28, 2008 | 07:03 PM
  #1 (permalink)  
Hugo's Avatar
Thread Starter
Joined: Jul 2006
Posts: 117
Likes: 0
From: Yarra Valley Victoria Australia
Default Vortec

Anybody have part numbers or ideas for Vortec superchargers Vortec wont answer my emails and the local disty here just throws up his hands.

Going to throw it into the race car and see what goes bang
 
Reply
Old Apr 28, 2008 | 09:43 PM
  #2 (permalink)  
Maxwell's Avatar
Senior Member
Joined: Dec 2006
Posts: 2,881
Likes: 3
Default Re: Vortec

Do your homework, if you do the calculations and select the trim ring for the housing mounting on the vortec you can figure it out pretty easily.

do a search for vortec install, it's covered on the MBworld forum.
 
Reply
Old Apr 28, 2008 | 09:47 PM
  #3 (permalink)  
Maxwell's Avatar
Senior Member
Joined: Dec 2006
Posts: 2,881
Likes: 3
Default Re: Vortec

https://www.crossfireforum.org/forum...vortec+install

 
Reply
Old Apr 29, 2008 | 06:05 AM
  #4 (permalink)  
ChuckNorris's Avatar
Forum Regular
Joined: Apr 2008
Posts: 716
Likes: 4
Default Re: Vortec

The v5 should work the best. When you order it they should help you with the pulley sizes.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Maxwell
Troubleshooting & Technical Questions & Modifications
47
Feb 27, 2008 09:05 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 10:36 AM.