04 Crossfire Sound System Wiring

Radio 12v: red/dk. green (@ radio harness)
Radio Ground: brown (@ radio harness)
Radio Ignition: pink/yellow/dk. green) (@radio harness)
Radio Illumination: gray/blue (dimmer) (@radio harness)

Factory Amp Turn On: blue/dk. green (@ radio harness)
Power Antenna: Same as above!

LF Speaker +/-: black/blue - brown/dk.green (@ power amp)
RF Speaker +/-: black/pink - brown/yellow (@ power amp)
LR Speaker +/-: pink - dk. green (@ power amp)
RR Speaker +/-: blue/red - blackyellow (@ power amp)

Note: The power amplifier is on the passenger side floor panel under the carpet.
[/b]

 

Sandman this is probaly one of the best posts on here! By the way were is the info from

 

 

I run a custom car audio / video shop. My information comes from our tech guides.

The post above is also great to have ..... Good Job.

Regards,

 

Man sweet this really helps by the way I don't know much about car installs so if this sounds dumb. Why do the subs have 4 wires going into it.

 

Some additional info here:
http://home.comcast.net/~burnsdg/xfi...reo/Page_1.jpg
http://home.comcast.net/~burnsdg/xfi...reo/Page_2.jpg
http://home.comcast.net/~burnsdg/xfi...reo/Page_3.jpg
http://home.comcast.net/~burnsdg/xfi...reo/Page_4.jpg
http://home.comcast.net/~burnsdg/xfi...reo/Page_5.jpg

I didn't past in as inline pics cuz they're huge.