Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

A tribute to Rudy

Thread Tools
 
Old Apr 17, 2013 | 12:36 AM
  #1 (permalink)  
amx1397's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 6,714
Likes: 453
From: Indialantic Fl./blairsville Ga
Default A tribute to Rudy

well here it is again, if it is something that we as members of this forum are not allowed to do please let me know, don't just delete it and say nothing.
so here are some of the things i want to thank Rudy for making for us,

Here's a list of what immediately came to mine. I'm sure there there are other things I'm forgetting but these are the keynotes.

First Crossfire Triple Pillar Pods with(JR Industries)
Custom Matching SRT6 and AMG Gauges with (JR Industries)
Double DIN Center Consoles with (JR Industries)
Crossfire Center Vent Triple Gauge Panel with(JR Industries)
SLK Center Dash Dual Gauge Clusters with (JR Industries)
NoKeyGo Proximity Keyless Entry and Starting (Never made more than just the prototype because it was buggy sometimes and nobody really expressed any interest after they found out what it would cost)
Quick Touch Convertible Top Module (First mod he sold on the forum)
iPod Interface for Crossfire NAV Radio (didn't build them but worked with the manufacturer to get them to work properly with these radios)
V8 55 Kompressor Conversion. (Which is still the single most powerful Crossfire mod to this day!Mine LOL)
SilverSwitch Aftermarket Accessory Controller
Adjustable Exhaust Cutout Controller (I have this and the SilverSwitch in my car formy cutouts)
Dual Throttle Controller (never did anything with it because once in a while it would act funny and he didn't want the accept liablity of it causing an accident or killing someone)
MemoryTrac and ESP Module (Again, never did anything with it because of product liability and for fear someone would wrap themselves around a light pole while drifting around a street corner)
Crossfire DashDAQ Mounting Bracket and Low-Profile Extension Cables
62mm Karmen Pulley (didn't make it but had a good deal to do with it getting to market)
M112k Intercooler (Speedriven manufactures them but they were designed by Rudy

SRT6 Performance TCU Software Upgrade (Worked with Marcin on this one)
SRT6 Modified Gear Ratio TCU Software Upgrade (Again, worked with Marcin on this)
all crossfires front and rear adjustable suspension system.
 
Old Apr 17, 2013 | 07:26 AM
  #2 (permalink)  
grip grip's Avatar
Senior Member
Joined: Mar 2011
Posts: 3,906
Likes: 15
From: TN
Default Re: A tribute to Rudy

No offense, but WTH???? Didn't we just praise Rudy a couple months ago (see link below). I put Rudy and Rob right up there with fresh Canadian Bacon, but what gives? Is Rudy sick???

https://www.crossfireforum.org/forum...y-compart.html
 

Last edited by grip grip; Apr 17, 2013 at 10:10 AM.
Old Apr 17, 2013 | 09:35 AM
  #3 (permalink)  
maxcichon's Avatar
Senior Member
Joined: Sep 2007
Posts: 8,015
Likes: 14
From: MOFN, AL, 70 miles from George
Default Re: A tribute to Rudy

Yup. The dude ROCKS.
 
Old Apr 17, 2013 | 11:02 AM
  #4 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: A tribute to Rudy

Originally Posted by grip grip
No offense, but WTH???? Didn't we just praise Rudy a couple months ago (see link below). I put Rudy and Rob right up there with fresh Canadian Bacon, but what gives? Is Rudy sick???

https://www.crossfireforum.org/forum...y-compart.html
I'm thinking amx1397 wants something and is buttering up Rudy before he asks.
 
Old Apr 17, 2013 | 11:54 AM
  #5 (permalink)  
amx1397's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 6,714
Likes: 453
From: Indialantic Fl./blairsville Ga
Default Re: A tribute to Rudy

Originally Posted by grip grip
No offense, but WTH???? Didn't we just praise Rudy a couple months ago (see link below). I put Rudy and Rob right up there with fresh Canadian Bacon, but what gives? Is Rudy sick???

https://www.crossfireforum.org/forum...y-compart.html
I repost it because I could not find the original post. I searched my name, I searched Rudy's name, and I search tribute to Rudy, nothing showed up, so I was assuming that it had been deleted. Which brings weight of this question where did you find?,
onehundred80,, I am always buttering up Rudy and Rob, because I'm always looking for the next mod, as long as I have this car I will need them both, jim
 
Old Apr 17, 2013 | 12:02 PM
  #6 (permalink)  
grip grip's Avatar
Senior Member
Joined: Mar 2011
Posts: 3,906
Likes: 15
From: TN
Default Re: A tribute to Rudy

Originally Posted by amx1397
I repost it because I could not find the original post. I searched my name, I searched Rudy's name, and I search tribute to Rudy, nothing showed up, so I was assuming that it had been deleted. Which brings weight of this question where did you find?,
onehundred80,, I am always buttering up Rudy and Rob, because I'm always looking for the next mod, as long as I have this car I will need them both, jim
I just searched for "Rudy Tribute". https://www.crossfireforum.org/forum...archid=1802310
 
Old Apr 17, 2013 | 12:45 PM
  #7 (permalink)  
amx1397's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 6,714
Likes: 453
From: Indialantic Fl./blairsville Ga
Default Re: A tribute to Rudy

Originally Posted by grip grip
I just searched for "Rudy Tribute". https://www.crossfireforum.org/forum...archid=1802310
I searched everything i know,, but you have to remember i just learned my cell phone now everyone wants me to learn how to use a computer. jim
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tom2112
Parts/Accessories for sale - Archive
6
Oct 26, 2015 08:18 PM
sk8erjosh09
All Crossfires
1
Sep 4, 2015 09:24 PM
RED DOG
Parts/Accessories for sale - Archive
1
Jul 21, 2015 07:58 AM
amx1397
Southeast Forum
5
May 22, 2011 07:57 PM
waylander
General
0
Sep 14, 2009 02:58 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 07:37 AM.