I still have not been able to remove the dam stock bulbs. If any body can give me some advice on it would be greatly apreciated.

 

are you referring to the headlamp, fog lamp or turn signal bulbs?

 

andrew there for the low beams

 

First take off the wiring harness connected to the bulb. Remember how you took it off so you can put it back on the same way. Then there is a retainer clip shaped like a "v". At the point of that "v", there is a hook holding it in place. Free the retainer clip from the hook and the bulb will come out. The bulb can sit in the hole in one specific orientation. Put the new bulb in. Replace clip. Replace wiring harness. Pau ("finished" in Hawaiian).

 

MadRooster , thanks for the help man!I got the bulbs in and there pure white and a little britter than stock.