chips
ok im looking to buy a plug in programmer the ones i check on say wont work on my crossfire i know eurotunes works good , i would like to have the programmer that plugs right into my obd, any other ones thats anybody has on here, there seems to be so much junk chips on here , just need to know what is good and will work on the crossfire non turbo
It is to good to be true!
No chip works trust me, or him or him or ...........
Get EuroCharged or similar and you are looking at $300 or so not $10.
The 'chip' is usually nothing but a resistor in a fancy package that modifies the voltage seen by the ECU for the MAF or IAT sensor.
They are good for nuttin but engine damage.
They are good for nuttin but engine damage.
ok im looking to buy a plug in programmer the ones i check on say wont work on my crossfire i know eurotunes works good , i would like to have the programmer that plugs right into my obd, any other ones thats anybody has on here, there seems to be so much junk chips on here , just need to know what is good and will work on the crossfire non turbo
Now you know he is referring to the Supercharger. Many people do not realize that a SC and turbocharger are different. So, for those that don't know, a supercharger runs off the main belt and a turbocharger is turned by the exhaust gas, that is why a turbo takes some time to spool up and results in that terrible feeling of turbo lag, then BAM.
Now you know he is referring to the Supercharger. Many people do not realize that a SC and turbocharger are different. So, for those that don't know, a supercharger runs off the main belt and a turbocharger is turned by the exhaust gas, that is why a turbo takes some time to spool up and results in that terrible feeling of turbo lag, then BAM.
Okie dokie. I will refrain from presuming anything in the future.
Thread
Thread Starter
Forum
Replies
Last Post
xfireohio
Cars For Sale - Archive
10
Jul 20, 2020 12:03 AM
axnguyen
Cars For Sale - Archive
1
Jul 21, 2015 11:41 AM
ricardo 53
Cars For Sale - Archive
0
Jul 21, 2015 07:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



