Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Please Allow Me to Vent "turn over"

Thread Tools
 
Old Feb 1, 2016 | 10:02 PM
  #1 (permalink)  
KDW4Him's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2011
Posts: 1,287
Likes: 29
From: Alma, MI
Default Please Allow Me to Vent "turn over"

When you describe what your car is doing when you put the key in the start position the proper term is the car is cranking or turning over. When the car starts it is then running.

When some of you say the car cranks but doesn't turn over, that phrase does not register with me. If the motor IS cranking it IS turning over.

I say this because when some of you say the car doesn't turn over you mean the car does not crank yet the rest of you who say the car doesn't turn over you mean it doesn't start. VERY CONFUSING!

So from this point forward we all use similar terms to describe symptoms. Otherwise we have no clue what is going on and we cannot help you.

That is all, venting complete, carry on....
 
Reply
Old Feb 1, 2016 | 11:08 PM
  #2 (permalink)  
JEFASOLD's Avatar
Senior Member
Joined: Aug 2012
Posts: 1,709
Likes: 10
Default Re: Please Allow Me to Vent "turn over"

Sounds like you are getting all cranked up!!!
 
Reply
Old Feb 2, 2016 | 07:38 AM
  #3 (permalink)  
maxcichon's Avatar
Senior Member
Joined: Sep 2007
Posts: 8,014
Likes: 14
From: MOFN, AL, 70 miles from George
Default Re: Please Allow Me to Vent "turn over"

KDW, I agree.
 
Reply
Old Feb 2, 2016 | 07:39 AM
  #4 (permalink)  
maxcichon's Avatar
Senior Member
Joined: Sep 2007
Posts: 8,014
Likes: 14
From: MOFN, AL, 70 miles from George
Default Re: Please Allow Me to Vent "turn over"

Now maybe we can get some folks to turn over a new leaf?

I hope so...
 
Reply
Old Feb 2, 2016 | 09:38 AM
  #5 (permalink)  
Steve Jr's Avatar
Senior Member
Joined: Sep 2015
Posts: 1,465
Likes: 4
From: Knoxville
Default Re: Please Allow Me to Vent "turn over"

Don't get all "cranked up" ;you will "start", "turning over" in your mind ,the "running" conditions,that "stall" a straight answer
 
Reply
Old Feb 2, 2016 | 09:39 AM
  #6 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 185
From: Lineville, AL
Default Re: Please Allow Me to Vent "turn over"

5 relevant quotes !
Anybody want to top that ?
 
Reply
Old Feb 2, 2016 | 10:36 AM
  #7 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Default Re: Please Allow Me to Vent "turn over"

Originally Posted by ala_xfire
5 relevant quotes !
Anybody want to top that ?
For starters I have to agree to the above, I tire at the poor transmission of facts when people clutch at vague expressions to describe their battery of problems. Sometimes I think they are given us the gears or trying to shaft us. Sometimes I think I'll shift my attention some place else.
 

Last edited by onehundred80; Feb 2, 2016 at 10:39 AM.
Reply
Old Feb 2, 2016 | 01:41 PM
  #8 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,649
Likes: 777
From: Orange County CA.
Default Re: Please Allow Me to Vent "turn over"

well said!
 
Reply
Old Feb 2, 2016 | 02:03 PM
  #9 (permalink)  
maxcichon's Avatar
Senior Member
Joined: Sep 2007
Posts: 8,014
Likes: 14
From: MOFN, AL, 70 miles from George
Default Re: Please Allow Me to Vent "turn over"

After reading 180's spiel, I think I'll remain neutral...until 3:00. Then I'll shift over to the local tavern!

Only 2. But I work for a living.
 
Reply
Old Feb 2, 2016 | 04:21 PM
  #10 (permalink)  
kingdavid54's Avatar
Joined: Jun 2013
Posts: 293
Likes: 2
From: concord nc.
Default Re: Please Allow Me to Vent "turn over"

Originally Posted by KDW4Him
When you describe what your car is doing when you put the key in the start position the proper term is the car is cranking or turning over. When the car starts it is then running.

When some of you say the car cranks but doesn't turn over, that phrase does not register with me. If the motor IS cranking it IS turning over.

I say this because when some of you say the car doesn't turn over you mean the car does not crank yet the rest of you who say the car doesn't turn over you mean it doesn't start. VERY CONFUSING!

So from this point forward we all use similar terms to describe symptoms. Otherwise we have no clue what is going on and we cannot help you.

That is all, venting complete, carry on....
Clearly your obsession with " lexicography " has left you just a tad bit crankey with the issue of rotational vs non-rotational reciprocating mass, maybe this will become an energizing key that will turn over and start an energized engine of conversation that will serve as an alternator to change the charge of the battery of questions that is sure to come that way you will become the regulator.
 
Reply
Old Feb 3, 2016 | 07:55 PM
  #11 (permalink)  
KDW4Him's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2011
Posts: 1,287
Likes: 29
From: Alma, MI
Default Re: Please Allow Me to Vent "turn over"

Originally Posted by JEFASOLD
Sounds like you are getting all cranked up!!!
Or maybe just turned over...
 
Reply
Old Feb 3, 2016 | 07:57 PM
  #12 (permalink)  
KDW4Him's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2011
Posts: 1,287
Likes: 29
From: Alma, MI
Default Re: Please Allow Me to Vent "turn over"

If I knew "ranting" could have sparked this kind of humor I woulda vented ages ago...
 
Reply
Old Feb 4, 2016 | 05:37 PM
  #13 (permalink)  
boostmonkey's Avatar
Forum Regular
Joined: Jan 2011
Posts: 528
Likes: 0
Default

My engine turnt over.

When it was getting cranked up.

Then it started.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
theglot
All Crossfires
25
Sep 22, 2020 04:58 PM
BWilson
New Member Introductions
65
Feb 27, 2016 11:07 AM
Crossfiren
Audio, Video and Electronics
3
Jan 11, 2016 12:21 PM
jmartinpadilla
WTB - Items/Parts Wanted to Buy - Archive
7
Jan 8, 2016 06:30 PM
Lmontgomerysr
Troubleshooting & Technical Questions & Modifications
1
Jan 7, 2016 12:14 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 09:27 AM.