Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

What is this part?!

Thread Tools
 
Old May 12, 2017 | 12:36 PM
  #1 (permalink)  
chturner's Avatar
Thread Starter
Joined: Apr 2015
Posts: 292
Likes: 4
From: Cochran, Georgia
Default What is this part?!

Looks like a sensor of some sort. The wire it is attached to clips in behind the coolant reservoir. Tried googling the part number but it came back with something that didn't look the same.
 
Reply
Old May 12, 2017 | 04:18 PM
  #2 (permalink)  
crookedview's Avatar
Joined: Jun 2008
Posts: 221
Likes: 1
From: South Dakota
Default Re: What is this part?!

Looks like maybe a coolant level sensor: 2004 CHRYSLER CROSSFIRE 3.2L V6 Coolant Level Sensor | RockAuto

5098768AA
 
Reply
Old May 12, 2017 | 04:28 PM
  #3 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: What is this part?!

Coolant level sensor, it goes into the bottom front of the reservoir. That makes me wonder what is in that hole now?
 
Reply
Old May 13, 2017 | 06:03 AM
  #4 (permalink)  
maxcichon's Avatar
Senior Member
Joined: Sep 2007
Posts: 8,015
Likes: 14
From: MOFN, AL, 70 miles from George
Default Re: What is this part?!

"Sensor" part of the level switch. The floating part is inside the tank, moving up and down.

Looks like it was pulled out and left hanging....
 
Reply
Old May 18, 2017 | 09:42 AM
  #5 (permalink)  
chturner's Avatar
Thread Starter
Joined: Apr 2015
Posts: 292
Likes: 4
From: Cochran, Georgia
Default Re: What is this part?!

It was my fault! Didn't know that sensor was there to begin with, so I didnt notice it came out when I moved the reservoir to do my light bulbs. Thanks guys
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 10:13 AM.