Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Technical support

Thread Tools
 
Old Jun 1, 2020 | 11:39 AM
  #1 (permalink)  
Ifecollins's Avatar
Thread Starter
Joined: May 2020
Posts: 3
Likes: 0
From: Anambra
Default Technical support

My 2004 cross-fire won't crank please what are the solution to the problem please I really need help here please
 
Reply
Old Jun 1, 2020 | 02:34 PM
  #2 (permalink)  
amx1397's Avatar
Senior Member
Joined: Apr 2008
Posts: 6,714
Likes: 453
From: Indialantic Fl./blairsville Ga
Default Re: Technical support

check the batt make sure it is FULLY charged
disconnect the batt for 10 to 15 min. retry
try another rcm or send it to tighed1 for repair https://www.crossfireforum.org/forum...-no-start.html

is it trunning over and will not start,,
 
Reply
Old Jun 1, 2020 | 03:06 PM
  #3 (permalink)  
Ifecollins's Avatar
Thread Starter
Joined: May 2020
Posts: 3
Likes: 0
From: Anambra
Default Re: Technical support

I have changed the rcm still same thing I also removed the battery head for 24 hours please sir any other solution?
 
Reply
Old Jun 1, 2020 | 05:16 PM
  #4 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,635
Likes: 776
From: Orange County CA.
Default Re: Technical support

Do the lights on your dash come on when you turn the key? Does it make any sound ?
 
Reply
Old Jun 1, 2020 | 05:27 PM
  #5 (permalink)  
Ifecollins's Avatar
Thread Starter
Joined: May 2020
Posts: 3
Likes: 0
From: Anambra
Default Re: Technical support

Originally Posted by ZERACER
Do the lights on your dash come on when you turn the key? Does it make any sound ?
yes the ignition light on dash always comes on when I turn it on and it makes some beep sound but if I start the car it won't crank. I don't know if it's an error with the key chips transponder
 
Reply
Old Jun 2, 2020 | 08:56 AM
  #6 (permalink)  
zip439's Avatar
Senior Member
Joined: Jul 2010
Posts: 2,266
Likes: 462
From: SE Alabama
Default Re: Technical support

Originally Posted by Ifecollins
yes the ignition light on dash always comes on when I turn it on and it makes some beep sound but if I start the car it won't crank. I don't know if it's an error with the key chips transponder
You say you replaced the RCM. With what? Is it brand new, What brand and part number?
Have you read this? What about the relays they are problematic at the age of our cars.
What did you do with the RCM you removed from the car? If you still have it, send it to tighed1 for repairs. He will not only solder it correctly, but will inspect and replace any relays that have gone bad. When you get it back slide it back into the correct spot in the black plastic box and try starting your car again.

Even if you have a brand new Mercedes RCM installed you may have a problem with the electrical connector, read this: CLICK
There are other possibilities as to why your car won't start, but you must first be absolutely certain you have eliminated the RCM as being the source of your problem.

PS do not start messing with the FOB. You will only introduce more problems. You could remove fuse #9 in the under hood fuse box and try to start the car with that fuse removed.
 

Last edited by zip439; Jun 2, 2020 at 09:02 AM. Reason: PS added
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tealcamaro55
Crossfire Coupe
32
Oct 31, 2023 09:04 PM
Punkin
Crossfire SRT6
4
Jan 16, 2009 07:23 PM
craftomatic
Troubleshooting & Technical Questions & Modifications
13
Apr 11, 2008 02:30 PM
Jeff Cobb
Wheels, Brakes, Tires and Suspension
1
Oct 21, 2007 11:52 AM
ChrisG
Troubleshooting & Technical Questions & Modifications
5
May 11, 2004 09:34 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 04:48 AM.