Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

No crank no start

Thread Tools
 
Old Nov 13, 2023 | 06:07 PM
  #1 (permalink)  
mark11's Avatar
Thread Starter
Joined: Nov 2023
Posts: 3
Likes: 0
From: Sydney
Default No crank no start

Hi
I have owned a CF for ten years. Up until now no problems. Driving along suddenly she won't get out of first and all dash error lights light up ??
Got her home then she won't crank won't start. Auto stuck in first. Does anyone know what's goin on ??
 
Reply
Old Nov 13, 2023 | 06:51 PM
  #2 (permalink)  
tighed1's Avatar
Senior Member
Joined: Aug 2008
Posts: 5,741
Likes: 96
From: Sierra Vista, Arizona
Default Re: No crank no start

Check the relay control module. If bad I can fix it. LMK.


 
Reply
Old Nov 13, 2023 | 07:06 PM
  #3 (permalink)  
mark11's Avatar
Thread Starter
Joined: Nov 2023
Posts: 3
Likes: 0
From: Sydney
Default Re: No crank no start

Thanks for the advice mate. Had a mechanic look at the CM played with it a bit then gave up. He replaced the Starter motor ( and charged me ) but still won't start. Problem is no one in Sydney seems to have the knowledge or the software to fix it
Pretty much ready yo send it to the wreckers.
 
Reply
Old Nov 13, 2023 | 10:46 PM
  #4 (permalink)  
M60A3Driver's Avatar
Senior Member
Joined: May 2023
Posts: 2,973
Likes: 1,564
From: New Jersey
Default Re: No crank no start

Originally Posted by mark11
Thanks for the advice mate. Had a mechanic look at the CM played with it a bit then gave up. He replaced the Starter motor ( and charged me ) but still won't start. Problem is no one in Sydney seems to have the knowledge or the software to fix it
Pretty much ready yo send it to the wreckers.
I hope you're joking about sending it to the junkyard. The RCM is relatively cheap and readily available. Why not just swap it out and give it a try.
 
Reply
Old Nov 14, 2023 | 10:59 PM
  #5 (permalink)  
GraphiteGhost's Avatar
Senior Member
Joined: Jul 2009
Posts: 6,296
Likes: 762
From: Central South Carolina
Default Re: No crank no start

Originally Posted by mark11
Thanks for the advice mate. Had a mechanic look at the CM played with it a bit then gave up. He replaced the Starter motor ( and charged me ) but still won't start. Problem is no one in Sydney seems to have the knowledge or the software to fix it
Pretty much ready yo send it to the wreckers.


Guy had ***** to charge you for a starter and it still doesn't work (unless in fact the starter was bad along with something else)...


.
 
Reply
Old Nov 15, 2023 | 12:25 AM
  #6 (permalink)  
mark11's Avatar
Thread Starter
Joined: Nov 2023
Posts: 3
Likes: 0
From: Sydney
Default Re: No crank no start

Hi
Being the mug that I am I allowed this thief to go off and pick up a replacement SM without insisting he confirm the status of me old one. Of course it wasn't the issue but that didn't stop him charging me. He even did me the favour of taking away me old one at no extra charge.
 
Reply
Old Nov 15, 2023 | 09:04 AM
  #7 (permalink)  
amx1397's Avatar
Senior Member
Joined: Apr 2008
Posts: 6,692
Likes: 428
From: Indialantic Fl.
Default Re: No crank no start

Just get a RCM or K40 k40 is the same as a rcm it is the ,mercedes part they are the same so if u can't get a RCM then get a k40 from mercedes or amazon it goes in the computer box next to the Batt. it is a plug in soy can can replace it. jim
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lary McQ
New Member Introductions
1
Apr 1, 2022 11:26 PM
rednrollin
Troubleshooting & Technical Questions & Modifications
9
Jul 28, 2021 03:21 PM
gompang
Troubleshooting & Technical Questions & Modifications
15
Jul 27, 2019 02:18 PM
Lmontgomerysr
Troubleshooting & Technical Questions & Modifications
1
Jan 7, 2016 12:14 AM
kbbilode
Troubleshooting & Technical Questions & Modifications
4
Jun 13, 2009 05:03 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 08:44 AM.