CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   TSBs and How-To Articles (https://www.crossfireforum.org/forum/tsbs-how-articles/)
-   -   how to jack front when swaping tires (https://www.crossfireforum.org/forum/tsbs-how-articles/80334-how-jack-front-when-swaping-tires.html)

RED-Fire 06-24-2019 09:06 AM

how to jack front when swaping tires
 
I need to swap my tires and not sure of the best way, Can a lift in a repair stop be used ?? If so where should it hit under the car..
other wise is there a point where i can jack up the front so that both tires are off the ground??

ala_xfire 06-24-2019 09:40 AM

Re: how to jack front when swaping tires
 
Yes, and yes
For the lift, position the 4 arms to contact the 4 jack points.
For the jack, you will need a low profile one and position it centered on the frame cross member behind the engine.
I you can't get the jack under, then jack up the rear first by placing the jack centered on the differential and then place
jack stands on the 2 rear body jack points.
You can then move the jack from the rear to access that front cross member from the rear, then install 2 jack stands on the front 2 body jack points

RED-Fire 06-24-2019 02:58 PM

Re: how to jack front when swaping tires
 
Thank You so much ! :D


All times are GMT -4. The time now is 08:16 AM.


© 2024 MH Sub I, LLC dba Internet Brands