Desperate need of advice/help

I need a skreem module(£1056+vat) but there's none in uk, Germany,Italy(where part now come from fiat)

Ideally I need to source a 2nd hand ecu, skreem module, key and ignition barrel pickup- which is nearing impossible as my motors a manual(rare) and most scrap yards have sold the components individually!!!

 

Edit
I went back and now see that you have been through the hoops here, still seems a bit extreme though.

 

Have you spoken to ACD Chrysler breakers, Lancashire. They break lots of Xfires and are likely to have what you need
Good luck!

 

The guy at ACD was spot on- has kits for autos but rarely gets a manual in. It's looking like I'm going to have to put it in storage until I source a damaged manual.

 

Would one from a R170 SLK320 fit? Worth a look if you could find one

 

Are you still needing a Skreem module? I have one off an 06 Crossfire.

 

if you are still looking have you seen this ??/

2006 Chrysler Crossfire 3.2 Auto - Breaking for parts | eBay

 

These components second hand are of no use individually as they will not pair, you can buy and use new parts individually.

I have just got a kit from ACD £550 + vat for my SRT6 Roadster, I have to get it re-mapped as it is from a N/A model, no SRT6 parts around second hand if this does not solve my problem a new SRT6 ecu is £1950 + vat