I'm looking at some wheels, but the design I like seems to only be available with 20mm offset (Both front and rear). This is over a half inch push outwards, would these be usable with stock diameter tires, or would I get rubbing on the lip of the fender?

I suspect it'll rub, but if anyone has tried, let me know....btw wheel widths are 8.0/9.5 front/rear.

 

Check threads for OEM offset. I think we can use up to 30f - 35r front to rear max.

 

You will be fine... an 8in wide wheel with +20mm offset wont come close to rubbing anything.. especially the fender. i have a 19in/ 9in wide wheel with a +35mm offset and have no problems..

 

How about the rears though? 9.5" wide, and half an inch pushed out...though if 10" wide wheels fit, I pretty much have my answer there..... forgot to mention, it's 19's front an back, though if they have 18's I may do that in front, as the roads here aren't exactly smooth as a Texas interstate.

 

is your car slammed or something?

 

No, still stock ride...may eventually go the eibach route, but not yet.

 

then it will never come close to the fender.. the stock ride sits a few inches over the tire.. front and back.. even with the eibach you will be fine.. you will only have a problem if you slam the car. right now i have spacers on my wheels to bring them out just past the body of the car to give it a wider, more aggressive look and have absolutely no problems whatsoever!