![]() |
Pictures of Lowered Crossfires, SRT-6's?
Not sure if there's already a thread on this.. but it would be nice if you guys could upload pictures of your cars lowered on springs and coils, and the brand of which you're using. Feedback on how it is would be nice (especially on the springs) Thanks! :)
|
Re: Pictures of Lowered Crossfires, SRT-6's?
An oldie but goodie, my old Limited:
https://www.crossfireforum.org/galle...05568240_n.jpg https://www.crossfireforum.org/galle...dium/john5.jpg Achieved the drop using trimmed SRT springs (minus one coil) Ride was harsh but predictable... tracked VERY well, very little roll and no "skittering" effect while taking high-speed corners over rough surfaces. Ride was as comfortable as falling down a staircase. :mad: I won't be going this route on my new SRT, but I will be lowering it with B&G springs. |
Re: Pictures of Lowered Crossfires, SRT-6's?
3 Attachment(s)
with the V8 in the front ,I didn't need to lower it i did lower the rear with LOL adjustable K W 's LOL because to adjust them you have to take the spring out. ,, it made the car too low and i wanted adjustable coilovers so i could balance the car ,,when the rear was lowered the front came up about 3/4" so Kw coil overs are a joke. here is the pic. look at the top of the spring where it fits into the body of the car see the purple adjuster. LOL <<LOL<<
here is the car. https://www.crossfireforum.org/forum...rear-only.html |
Re: Pictures of Lowered Crossfires, SRT-6's?
1 Attachment(s)
1/2 coil trim front and back= 1" drop
|
Re: Pictures of Lowered Crossfires, SRT-6's?
1 Attachment(s)
Lowered on K&W's. Adjustability is a joke ..... a cruel joke at that. But for track duty I don't think a better combo exists for the Crossfire. The GTR would leave me on the straights but I more than made up for it under braking and in the corners. End result was a point bye. YES!
Les |
Re: Pictures of Lowered Crossfires, SRT-6's?
1 Attachment(s)
Here's mine. Lowered via cut SRT6 springs - 3/4 of a coil at all 4 corners. I also have Koni adjustable shocks. I love the ride...
|
Re: Pictures of Lowered Crossfires, SRT-6's?
I spent a couple hours driving in front of, next to and behind Len's car. Best looking Crossfire I have ever seen.:cool:
|
Re: Pictures of Lowered Crossfires, SRT-6's?
Originally Posted by geogramps
(Post 686893)
I spent a couple hours driving in front of, next to and behind Len's car. Best looking Crossfire I have ever seen.:cool:
|
Re: Pictures of Lowered Crossfires, SRT-6's?
Thanks guys! It seems I'm never satisfied though. There's always something more I need to do to the car. It's a sickness, lol! Alright, back on topic. Let's see some more lowered Crossfires!!
|
Re: Pictures of Lowered Crossfires, SRT-6's?
Originally Posted by JHM2K
(Post 686898)
I'm just jealous I can't see it in person. I have admired his car for years. THE definition of "reserved aggression"
|
Re: Pictures of Lowered Crossfires, SRT-6's?
Originally Posted by gr8len
(Post 686838)
Here's mine. Lowered via cut SRT6 springs - 3/4 of a coil at all 4 corners. I also have Koni adjustable shocks. I love the ride...
|
Re: Pictures of Lowered Crossfires, SRT-6's?
4 Attachment(s)
DIY cut coil springs, 1 full coil off rear and 7/8 coil cut off front, maxed out spring pads front and rear (cut too much coil). 20" wheels rear 19" wheels front, stock shocks.
Attachment 42608 Attachment 42609 Attachment 42610 Attachment 42611 |
Re: Pictures of Lowered Crossfires, SRT-6's?
|
Re: Pictures of Lowered Crossfires, SRT-6's?
Is this low enough for you?
https://www.crossfireforum.org/galle...medium/a52.jpg Our good friend gravity made that possible LOL Mine is sitting on cut SRT springs w/ OEM shocks (for now) 18/20 stagger https://www.crossfireforum.org/galle...m/Overlook.jpg https://www.crossfireforum.org/galle...iver_Falls.jpg |
Re: Pictures of Lowered Crossfires, SRT-6's?
[QUOTE=JHM2K;686806]An oldie but goodie, my old Limited:
https://www.crossfireforum.org/galle...dium/john5.jpg you look like youve got some serious negative camber in the front did you ever get it aligned? |
Re: Pictures of Lowered Crossfires, SRT-6's?
Originally Posted by BoilerUpXFire
(Post 698480)
Is this low enough for you?
https://www.crossfireforum.org/galle...medium/a52.jpg Our good friend gravity made that possible LOL |
Re: Pictures of Lowered Crossfires, SRT-6's?
Originally Posted by JesseJamessrt6
(Post 698373)
DIY cut coil springs, 1 full coil off rear and 7/8 coil cut off front, maxed out spring pads front and rear (cut too much coil). 20" wheels rear 19" wheels front, stock shocks.
http://i946.photobucket.com/albums/a...l/IMG_0589.jpg http://i946.photobucket.com/albums/a...l/IMG_0584.jpg http://i946.photobucket.com/albums/a...l/IMG_0561.jpg http://i946.photobucket.com/albums/a...l/IMG_0572.jpg |
Re: Pictures of Lowered Crossfires, SRT-6's?
Bumpity bump
|
Re: Pictures of Lowered Crossfires, SRT-6's?
https://www.crossfireforum.org/forum...-2-screws.html
So easy you wish you would had done it already. |
Re: Pictures of Lowered Crossfires, SRT-6's?
Originally Posted by redliner
(Post 698483)
you look like youve got some serious negative camber in the front did you ever get it aligned?
I ran at -1.8° negative camber on the front.... -.8° on the rear. I was also going through that bend at roughly 30mph when that photo was taken. Car handled like it was on rails :cool: |
| All times are GMT -4. The time now is 11:41 PM. |
© 2026 MH Sub I, LLC dba Internet Brands