StopTech 355mm BBK F/S
Thread Starter
Joined: Jul 2011
Posts: 238
Likes: 0
StopTech 355mm BBK F/S
Yup, bought them from needswings several weeks ago and now they're for sale. They have never been used or mounted. pm me if interested. make me an offer above 1500 shipped and ill take it...
Last edited by caseycowan5; Nov 26, 2012 at 09:54 PM.
Thread Starter
Joined: Jul 2011
Posts: 238
Likes: 0
Re: StopTech 355mm BBK F/S
Yup, bought them from needswings several weeks ago and now they're for sale. They have never been used or mounted. I went and got them powdercoated yellow, but dont worry, for $80 i can have them powder coated any color you would like. I can let them go for $2,300 and that truly is my rock bottom that i am offering all of you. These things are truly enormous and this is over $500 off of retail. Jump on this deal!
Now if you want to ask me why, I will tell you that i just scored and entire set of clk63 AMG brakes for a steal and will be going with those instead obviously. Yes those are the 6 piston front 4 piston rear, but that will be another post...
EDIT: Pics will be availible on friday when i pick them up from powder coating.
Now if you want to ask me why, I will tell you that i just scored and entire set of clk63 AMG brakes for a steal and will be going with those instead obviously. Yes those are the 6 piston front 4 piston rear, but that will be another post...
EDIT: Pics will be availible on friday when i pick them up from powder coating.
Senior Member
Joined: Aug 2008
Posts: 3,175
Likes: 16
From: Niagara Falls, Ontario, Canada
Re: StopTech 355mm BBK F/S
FYI. I love the stoptech 355mm on my car. Match it with a set of rears and your good to go with factory pedle feel and loads of stopping power. The mercedes 6 piston fronts with the 4 piston rears... different feel... not the same. 2¢
Thread Starter
Joined: Jul 2011
Posts: 238
Likes: 0
Re: StopTech 355mm BBK F/S
Ya that setup would also run me 6k instead of 1.5k and the looks of these beauties are 2nd to none. as for peddle feel, doesnt bother me in the least im guessing it gets stiffer?
Thread Starter
Joined: Jul 2011
Posts: 238
Likes: 0
Re: StopTech 355mm BBK F/S
Thanks! i thought this forum didnt have one
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Re: StopTech 355mm BBK F/S
I think my old NA required less pedal stroke than my SRT due to the increase in the total bore area. More pistons and bigger bores would need even more MC piston bore area to get a short pedal stroke.
If the bigger bored calipers got too hot when using the OEM MC, the clearance in the push rod may not be enough and you could end up with brakes being applied just because the oil was hot and expanded.
Thread Starter
Joined: Jul 2011
Posts: 238
Likes: 0
Re: StopTech 355mm BBK F/S
Especially with that impressive garage and mod list! Let me know.
Last edited by caseycowan5; Nov 7, 2012 at 12:54 PM.
Forum Regular
Joined: Nov 2004
Posts: 798
Likes: 0
Re: StopTech 355mm BBK F/S
I had planned on installing C32 brakes on the car and have the calipers sitting in the garage. I like the c32 brakes because I can use the wheels I planned for both the street and the track.
That being said I might be interested for the right price. I won't ask for it on a public forum so shoot me your minimum price. I am not looking to negotiate or screw you here. I am not really looking at these brakes but for the right price I will take them. If you are interested in pursuing shoot me you minimum price otherwise I wish you the best of luck in selling the brakes.
That being said I might be interested for the right price. I won't ask for it on a public forum so shoot me your minimum price. I am not looking to negotiate or screw you here. I am not really looking at these brakes but for the right price I will take them. If you are interested in pursuing shoot me you minimum price otherwise I wish you the best of luck in selling the brakes.
Senior Member
Joined: Apr 2009
Posts: 5,349
Likes: 4
From: murfreesboro,tn
Re: StopTech 355mm BBK F/S
just so you know jeremy 18" wheels are the smallest you run with the 6 pots. slk55 forgestar avus wheels work well but may not be your style. you can go e55,sl55 sl600 and use radusa 14mm ball seat 12mm shanks or order ccw wheels
