ESR Wheels They are telling me these will work??
Thread Starter
Joined: Jul 2017
Posts: 10
Likes: 2
From: Massachusetts
ESR Wheels They are telling me these will work??
Hello Everyone,
Like most of you who desire to change up the look of your wheels on your Crossfires, you've probably spent countless hours or even days trying to find something that will work. Seems like every time you get something you like, there is always one thing that will rain on your parade..........Soooooo frustrating.
Here's my situation and I will try to provide as much info as possible. I have a 2007 Roadster Limited and I have found some wheels that I really like. I will provide the link below. I DO NOT want to modify the car in any way including the use of spacers. The ONLY modification I have made to my car is I added MGP Caliper Covers to the front and rear brake pads. My OEM wheels do not rub on the covers and I am hoping to keep it that way. The front OEM wheels are close to the caliper covers but do not rub and the rear OEM wheels seem to have a lot more space away from the covers.
I spoke with a rep at ESR Wheels and he told me that these RF11 (Brushed Silver) wheels WILL work on my car, but after hearing and reading all of the horror stories about wheels I was hoping for some professional advice here on the forum. He suggested the following:
Front - 19 X 8.5 with a 30mm offset
Rear - 19 X 9.5 with a 35mm offset
These both can be custom drilled out to 5 X 112
I would really prefer the staggered set up, so I see that they also offer a 18 X 18.5 with a 30mm offset, that I could use on the front? The only down side is they are a 2 month backorder due to everyone being so busy.
This link will show the wheel and you can see next to the pictures that you have the option of selecting different sizes with a drop down menu.
https://esrwheels.com/products/rf11-...31988249395318
If someone could PLEASE look this over and tell me if anything relative to this wheel that will work for my Crossfire I would greatly appreciate it. Thanks to all in advance.
Like most of you who desire to change up the look of your wheels on your Crossfires, you've probably spent countless hours or even days trying to find something that will work. Seems like every time you get something you like, there is always one thing that will rain on your parade..........Soooooo frustrating.
Here's my situation and I will try to provide as much info as possible. I have a 2007 Roadster Limited and I have found some wheels that I really like. I will provide the link below. I DO NOT want to modify the car in any way including the use of spacers. The ONLY modification I have made to my car is I added MGP Caliper Covers to the front and rear brake pads. My OEM wheels do not rub on the covers and I am hoping to keep it that way. The front OEM wheels are close to the caliper covers but do not rub and the rear OEM wheels seem to have a lot more space away from the covers.
I spoke with a rep at ESR Wheels and he told me that these RF11 (Brushed Silver) wheels WILL work on my car, but after hearing and reading all of the horror stories about wheels I was hoping for some professional advice here on the forum. He suggested the following:
Front - 19 X 8.5 with a 30mm offset
Rear - 19 X 9.5 with a 35mm offset
These both can be custom drilled out to 5 X 112
I would really prefer the staggered set up, so I see that they also offer a 18 X 18.5 with a 30mm offset, that I could use on the front? The only down side is they are a 2 month backorder due to everyone being so busy.
This link will show the wheel and you can see next to the pictures that you have the option of selecting different sizes with a drop down menu.
https://esrwheels.com/products/rf11-...31988249395318
If someone could PLEASE look this over and tell me if anything relative to this wheel that will work for my Crossfire I would greatly appreciate it. Thanks to all in advance.
Senior Member
Joined: Apr 2008
Posts: 6,714
Likes: 453
From: Indialantic Fl./blairsville Ga
Re: ESR Wheels They are telling me these will work??
that wheel in the link LOOKS like it is for a front wheel drive car,, the front offset of 30 to 35 will work on the front but for the rear you should have 20 to 25 offset and how much lip ? look at the stocks specs front 18" x 8.5 30 offset bore/hub 66.56 rear 19x9.5 0ffset 20 hub 66.56.
a wheel with more lip could have more offset and still fit,, the best thing to do is go to a wheel store show them the wheel (on your phone) and your car and have them order that wheel, now it is up to them to fir the wheel.
a wheel with more lip could have more offset and still fit,, the best thing to do is go to a wheel store show them the wheel (on your phone) and your car and have them order that wheel, now it is up to them to fir the wheel.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)